Discontinued - HDMI® HDBaseT over Cat Extender Box Transmitter to Box Receiver Kit
    #29210
    
        C2G
    
    
Bazaarvoice SAP Hybris Integration Version 2.8.1
Replaced by C2G30010
                  	The HDMI over Cat kit is a complete solution for extending HDMI audio/video signals over a single Cat5e, Cat6, or Cat6a cable up to 300ft at a 1080p resolution. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. This solution utilizes TruChoice™ power, which allows power to be supplied over the Cat cable to both the transmitter and receiver from a single power adapter placed at either the transmitter or the receiver end of the solution. HDBaseT technology supports HDCP and allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display’s capabilities, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display. Built-in power surge protection and high ground loop immunity ensure high performance signal extension.
            Connector 1:
                                    (1) HDMI Female, (1) RJ-45 Female
                                Connector 2:
                                    (1) HDMI Female, (1) RJ-45 Female
                                - 
                    	Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
 - Send
 - Save as PDF
 
Features
- Extend HDMI up to 300ft at a 1080p resolution
 - Utilizes a single Cat5e, Cat6 or Cat6a cable for extension
 - HDBaseT technology supports EDID pass through
 - TruChoice Power allows for power at transmitter or receiver end
 - Kit includes both the transmitter and receiver units
 
             
            
            	WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
            
       
     Specifications
General Info
                | Color | Black | ||
| Type | Active Device, Extender, HDBaseT, Kit | ||
| Application Sector | Commercial | ||
| Product Line | C2G | ||
| Country Of Origin | Taiwan, Province Of China | ||
| Replaced by Part Number | C2G30010 | ||
| UPC Number | 757120292104 | 
Technical Information
                | Amperage | 1 A | ||
| Max Distance Support | 300 ft | ||
| Video Resolution | 1080p | 
Resources
Supporting Document
Cutsheet
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
So, I have a weird situation. I need to go from a PC laptop (HDMI out) to a CAT5 line. Running something close to 300 feet, not fully sure the length of the run, yet. From there I need to then get the signal to a DVI in for the projector. Is this possi...
            So, I have a weird situation. I need to go from a PC laptop (HDMI out) to a CAT5 line. Running something close to 300 feet, not fully sure the length of the run, yet. From there I need to then get the signal to a DVI in for the projector. Is this possible? What would recommend?
        
        
        
            You can easily use a HDMI to DVI cable for connection to the projector using this device.
            
            
    Date published: 2017-10-05
        Will this extender pass CEC codes from the transmitter to the receiver ? Sound Engineering Livonia, Mi. 48150
            Yes this will pass through CEC commands.
            
            
    Date published: 2017-10-05
        How many pairs of the Cat 6 cable are needed to work with the HDMI HDBASET EXTENDER BOX TRANSMITTER TO BOX RECEIVER KIT ?
            This requires all the pairs of a standard category cable.
            
            
    Date published: 2018-05-02
        Is there a pdf copy of this manual available online?
            Yes. Please see the link for the manual. http://www.cablestogo.com/docs/manuals/20001_-_30000/29223_29435_AV_over_cat5_all.pdf
            
            
    Date published: 2017-10-05
        Can these be used with unshielded Cat6 cable?
            Yes. This item can be used with unshielded Cat6 cable.
            
            
    Date published: 2017-10-05
        Will the HDMI data travel through a standard ethernet switch? I.E., could I run from one transmitter to an ethernet switch going to two different receivers?
            Unfortunately the device will not work through a Switch or HUB or Router.
            
            
    Date published: 2017-10-05
        Bazaarvoice SAP Hybris Integration Version 2.8.1



