Hello, Guest

Sign In To Your Account

Become A C2G Reseller

Create Consumer Account

View Order History

How to Install
a RapidRun System

How to Install a RapidRun System

Installing a RapidRun solution is easy!

A step by step look at installing the RapidRun solution.

Step 1:

Pull the runner cable through the desired installation location

RapidRun Optical runner cables require a RapidRun Optical Fiber Pulling Eye, while RapidRun Multi-Format runner cables features an integrated pulling ring.

Step 1 to Install RapidRun

Step 2:

Remove the caps from the runner's RapidRun connectors

The caps on the connector ends should come off easily.

Step 2 to Install RapidRun

Step 3:

Connect a flying lead or wall plate to each end of the runner cable

RapidRun Optical requires a flying lead or wall plate transmitter at the source end of the runner cable where the computer, Blu-Ray^™ player or other source device will be placed, and a receiver flying lead at the display end of the runner cable where the projector or TV will be placed.
RapidRun Multi-Format may be used with a wall plate or flying lead at the source end of the runner, and a wall plate or flying lead at the display end of the runner cable.

Step 3 to Install RapidRun

Step 4:

Connect the source and display devices to the flying lead or wall plate

RapidRun Optical flying leads & Multi-Format flying leads will connect directly to the A/V port of a device.
RapidRun Optical wall plates & Multi-Format wall plates require that a separate cable be used to connect from the A/V port of a device to the wall plate.

Step 4 to Install RapidRun