1ft Premium Shielded HD15 SXGA M/F Monitor Extension Cable with 90° Downward-Angled Male Connector

5.05 Reviews
Product Description
Gain maximum flexibility in positioning your monitor with this angled connector cable. The right-angled connector allows installation in even the tightest locations; the cable breaks downward from this connector. This premium VGA extension cable is ideal for video presentation devices, video splitters, and KVM switches. Constructed from premium grade video cable, it uses a combination of coax and twisted pair to accommodate cable runs up to 100 feet away without a booster (in most cases), and without the typical distortion problems associated with extended length cabling runs.

SXGA provides a screen resolution of 1280 x 1024 pixels. Not sure what resolution you need? See our VGA resolution guide.

Please Note: Pin 9 is not loaded. Pin 9 is not required for standard computer video applications.

• Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab
Warning symbol for P65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

Product Certifications
Tap an icon to learn more:
RoHS Compliant
Product Specifications
Color : Grey
Length : 1.00 Foot
UPC : 757120520214
Warranty : Lifetime
Vendor : C2G
Weight : 0.201 LB
• Download a PDF with the technical specifications of this product on the Support tab

Electrical Characteristics
• Conductor Resistance - 24AWG - 93.25Ω/m, 28AWG - 237.25Ω/m
• Impedance - 75 ± 5Ω at 10MHz
• Capacitance - 60 ± 10pf/m
• Velocity of Propagation - 70%
• Insulation Resistance (DC500V) - 10MΩ/km at 20°C min.
• Dielectric Strength - AC500V/1minute No Breakdown

Physical Characteristics
Voltage Rating - 30V
Temperature Rating - 80°C
Minimum Bend Radius - 90.00 ± 2.00mm

[B}Conductor (Qty. 3):[/B]
• Conductor Type - 28AWG (7/0.127), Tinned Copper
• Insulation - Foam PE, O.D. - 1.60 ± 0.13mm
• Spiral Shield - 42 ± 2/0.120, Tinned Copper
• Inner Jacket - PVC Low Toxic, O.D. - 2.50 ± 0.15mm
• Colors - (1) red, (1) green, (1) blue

Conductor (Qty. 4 pair):
• Conductor Type - 24AWG (7/0.200), Tinned Copper
• Inner Jacket - PVC Low Toxic, O.D. - 1.10 ± 0.10mm
• Colors - (red, red/white), (orange, orange/white), (brown, brown/white), (black, black/white)

• Connector Type - HD15 - Male, HD15 - Female
• Contact Material - Brass - Gold Flash
• Insulation - Black PBT
• Dimensions -
180° connector (LxHxW) - 47.5 x 15.5 x 34.0mm
45° connector (LxWxHxD) - 46.0 x 33.5 x 16.0 x 41.0mm
90° connector (LxHxW) - 28.5 x 31.5 x 33.0mm

[B}Overall Cable:[/B]
• Foil Shield - Aluminum Mylar, 125% Coverage
• Braided Shield - 176 ± 4(0.12 x 16 x 11), Tinned Copper, 85% Coverage
• Drain Wire - 24AWG (7/0.200), Tinned Copper
• Jacket - PVC Low Toxic, O.D. 9.00 ± 0.20mm
Product Support
• Download the technical specifications
Customer Reviews

For immediate help, please with us!

Rated 5 out of 5 by Mike from Great cable, top-notch performance Use the product to technically evaluate USB interfaces. Need a cable that doens't distort the signal, and can take lots of abuse, and this cable delivers.
Date published: 2010-06-03
Rated 5 out of 5 by Dave from Works great Works great for attaching a VGA cable to a wall mounted TV. The TV manufacturer should put the connectors on the side, not the back where they hit the wall.
Date published: 2011-10-06
Rated 5 out of 5 by Greg49454 from Just what I needed! Relieved the strain on my monitor cable which was stretched to reach the computer under the desk
Date published: 2010-11-26
Rated 5 out of 5 by Chuck from Only place to get this. Only place I could find this configuration in this length. Great products. Will use again.
Date published: 2011-11-28
Rated 5 out of 5 by Jon K from Just what I needed! We had a bracket that was blocking the VGA port on an LCD tv mounted to a dental chair. I had to use some spacers for the mount, but there still wasn't enough room, so I got these adapters... absolutely perfect for what I needed to do!
Date published: 2010-02-04
  • y_2021, m_10, d_22, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_52021, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cablestogo
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 58ms
Questions & Answers

For immediate answers, please with us for help!

Is there some way of changing the thumb screws on the female end to nuts? Thank you, William Piggott
Asked by: Anonymous
The thumbscrews are fixed on this cable. In order to have nuts on the connector, you would need to submit a request for quote. You may do so on our website at the following link: https://www.cablestogo.com/secure/custom-and-oem/request-a-quote
Answered by: Michael
Date published: 2017-10-06
  • y_2021, m_10, d_22, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_52021, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_cablestogo
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 130ms
More Choices