Extend remote control ability to any room in the house!
• Used with an IR Repeater kit to control two devices • Passes IR communication • Adhesive backing allows the emitters to be attached to the IR eye of a device
(1) 3.5mm Male
Product Description
Ideal for use with #40430, Remote Control Repeater Kit. Plug this IR emitter into a 2-conductor 3.5mm keystone jack and stick it over the IR eye on your audio/video equipment. The emitter operates on 12 VDC and is compatible with most IR devices. Put your components where they belong, not where you see them! You can even control audio/video devices located behind doors or in other rooms.
Rated 5 out of 5 by ToddW from Works Great with No ProblemsThe Dual Emitter cable works with the IR Repeater System (#40430), which I also purchased. All remote signals for various components work properly through the emitter when transmitted both directly (e.g. when pointed at the component) and when sent via the repeater unit. No problems or concerns.
Date published: 2010-01-18
Rated 5 out of 5 by omega from Works perfectly!Using this emitter with a USB-UIRT blaster to control my cable boxes from my SageTV PVR server. It was easy to stick on the boxes and it works like a champ. So far in a month of use not one single command has been missed or misinterpreted.
Date published: 2011-03-16
Rated 5 out of 5 by TO from Just what I neededJust what I needed to extend the IR signal to other devices in a closet behind my TV. Now I know where to go if I need more.
Date published: 2010-10-06
Rated 5 out of 5 by tootall from Excellent service and productReplaced old emitters in my motorhome. These were a direct replacement and are working flawlessly.
Will this dual emitter work when plugged directly in the back of a samsung 7100 series TV to control a cable box and Sonos sound bar with the remote that comes with the TV?
Asked by: Anonymous
Unfortunately this is a emitter cable it will not work when connected directly to a device. It will not be able to receive IR information. This is meant to be connected to our 40430 IR Repeater Kit.
Answered by: Tom
Date published: 2017-10-05
How far can red emitter heads be seperated? Two components are seperated from hub by about 6 feet Thank's
Asked by: Dr. S
The emitter cables that come with the 40430 are 10ft and they are dual cords on a zip cord. These can be split all the way to the end of the cable.
Answered by: Tom
Date published: 2017-10-05
What frequency range do these emitters work over? 30-60kHz?
Asked by: Jim
The IR repeater receives signal frequencies from 34kHz to 40 kHz. and transmits at 38Khz.
Answered by: Anonymous
Date published: 2017-10-05
Will this work with the Denon AVR-2313ci?
Asked by: Patrick
This will not work by itself on the Denon receiver. You would need something like our IR repeater kit 40430 in order to extend the IR range.