USB 1.1 Over Cat5 Superbooster Extender Dongle Kit with a 150 Foot Cat5 Cable

4.223 Reviews
Product Features
Complete kit for extending USB 1.1 signals 150 feet over Cat5
• Extends a USB 1.1 signal up to 150ft over category cables
• Allows for flexible positioning of USB peripherals
• Small form factor reduces installation clutter
• Kit includes both the transmitter and receiver units
(1) USB-A Male
(1) USB-A Female
Product Description
Conquer USB length limitations, and put your USB devices where you want them with our USB superbooster. This pocket-sized device extends the distance of a USB device to a host computer up to 150 feet so you can place your USB camera, printer, web cam, keyboard/mouse extension, or any other USB device exactly where you want it! This booster is powerful yet simple, with no drivers to install or special software required so it's compatible with any computer that supports USB.

This plug-and-play device consists of a base unit and a remote unit connected together by a standard Cat5, Cat5E, or Cat6 network cable (not included). Simply connect your cables to your device; then connect to your computer and USB peripheral and you're up and running. Bus-powered, it requires no external power source. Instead, the superbooster has internal DC power conditioning circuits to maintain the proper voltage to the remote device so no external power is required for either the base or remote units. Compliant with USB Specification 1.1.

Please Note: The power demands of devices such as external drives and USB hubs may require the use of external power for proper operation.

Note: If the USB signal is being extended to support an interactive whiteboard, then we recommend using our product 29338. For more information about this recommendation, read our application bulletin.
Warning symbol for P65 WARNING: Cancer and Reproductive Harm

Product Certifications
Tap an icon to learn more:
RoHS Compliant
Product Specifications
Color : Black
UPC : 757120399933
Warranty : 1 year for device, lifetime for cables
Vendor : C2G
Weight : 4.050 LB
•Download a PDF with the technical specifications of this product on the Support tab

USB Specifications
• Maximum extension distance: 150ft
• USB specification: USB 1.1
• USB transfer rates supported: Full Speed - 12Mbps, Low Speed - 1.5Mbps

Category Cable Requirements
• Category cables supported - Cat5, Cat5E, Cat6
• Cable pinouts supported - T568B - Recommended, T568A

Physical Characteristics
• USB connector - USB A Male
• Data connector - RJ45 Female
• Dimensions - 54.35 x 25.4 x 37.85mm
• Cable length - 13.00in

• USB connector - USB A Female
• Data connector - RJ45 Female
• Dimensions - 54.35 x 25.4 x 37.85mm

When making any changes to the setup, follow these steps:
1. Disconnect the USB Superbooster transmitter from the computer.
2. Make any Superbooster system changes*
3. Ensure that the USB device is connected to the receiver and the Cat5 cable to both the transmitter and receiver before connecting the transmitter to the computer.
4. Connect the USB Superbooster transmitter to the computer.
*Note: Changes may include: swapping out boosters, troubleshooting any cable issues, etc.
Product Uses
Application Diagram

Diagram above shows how one input such as the PC can connect to the base unit which distributes the signal to the remote unit that then can connect to an output such as the USB Hub.
Package Contents
• One #29341 - Super Booster Extender
• One 150ft Cat5E Cable
Product Support
• Download the manual
• Download the technical specifications
Customer Reviews

For immediate help, please with us!

Rated 4 out of 5 by Ric the instructor from Superbooster works Great! I use this product in a teaching setting to allow me to interface with the engine and bring the data into the classroom. Everything works great, I only need 75 feet of cable so the cable is too long and is a lot to handle. Otherwise a great product.
Date published: 2012-04-23
Rated 1 out of 5 by Matt in the Hat from Flakey at Best Flakey, intermittent. The pins get stuck down and have to be popped back into there slots on the RJ45 connectors. Do not buy this unless you like loosing connection to your computer.
Date published: 2012-03-22
Rated 5 out of 5 by Allan from Works as described- Good Service Using to boost signals for smartboard hardware, works as described. The booster saved replacing the hardware. Good service from C2G. Will use them again.
Date published: 2015-03-31
Rated 4 out of 5 by none from Good product. I have used it on computer and tv connections. It works on the newer tv sets alot better. I have mostly older tv.
Date published: 2011-10-13
Rated 5 out of 5 by joeboo from The USB Superbooster is a cut above We tried another brand (slightly lowered price), but it did not perform. After searching for solutions we noticed that most products ONLY recommend this USB extender for use with their product. So we ordered it - BANG! Worked perfectly right away. Since then we have not wasted our time with any other brands. This one is flawless. Thanks!
Date published: 2012-01-03
Rated 4 out of 5 by DWS from Simple means to extend mouse or keyboard We recently use this item to extend a computer mouse and/or keyboard 50 feet in a number of tough enviroments. Simple to use. Recommend use with a snagless ethernet cable. The units performed well. Plug and play. No issues.
Date published: 2010-06-07
Rated 1 out of 5 by GT from USB 1.1 Superbooster Extender, too slow Used to connect a web cam mounted on the top of a wall mounted 60" LCD monitor used for video conferencing. The web cam is connected to the Conf Room computer, accross the conference room, via a CAT5 cable in wall. The video quality was poor due to the slow speed of this device, USB version 1.1. A similar USB via CAT5 extender (USB 2.0) was swapped with this one and the video quality improved dramatically.
Date published: 2011-01-05
Rated 5 out of 5 by kstechtom from Worked great for video Worked Great for intra-oral camera (dental) fast, easy set-up. PC loaded camera without any problems. Good live video, freeze and save buttons work also.
Date published: 2010-02-17
  • y_2021, m_9, d_17, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_23
  • loc_en_US, sid_39993, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cablestogo
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 262ms
Questions & Answers

For immediate answers, please with us for help!

Does this extender support isochronous data transfer?
Asked by: Anonymous
Product 29341 does not support isochronous data transfer.
Answered by: Sean
Date published: 2017-10-05
Will this charge an iPhone or and iPad?
Asked by: Neil
We would not recommend using this to charge an iPhone or iPad.
Answered by: Steve
Date published: 2017-10-05
will this system work with 2.0/3.0 compliant USB web cameras specifically the Logitech C920.
Asked by: skull
This will only support USB 1.1 speeds. That web camera supports HD video which would require more than USB 1.1 speeds. We have a USB 2.0 booster (#53880) or you could use a USB active extension cable 40ft (#38999).
Answered by: Michael
Date published: 2017-10-06
Does it provide isolation between the receiver and the transmitter?
Asked by: Mike
It does not provide isolation between transmitter and receiver.
Answered by: Steve
Date published: 2017-10-05
Will this work with a USB hub?
Asked by: ART
Yes this can work with a USB Hub
Answered by: Tom
Date published: 2017-10-05
Will this work with an xbox kinnect?
Asked by: Jaime
No. You would need a USB 2.0 extension for that. It would be our part 53880.
Answered by: Steve
Date published: 2017-10-05
What is the Warranty of this Item?
Asked by: John
The warranty is 1 year.
Answered by: Steve
Date published: 2017-10-05
Do you have windows 10 drivers for "Model 29341 Type Base" SuperBooster?
Asked by: anonymous
This device does not need a driver. This device uses Windows Drivers that are preloaded.
Answered by: Tom
Date published: 2017-10-05
  • y_2021, m_9, d_16, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_39993, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_cablestogo
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 423ms
More Choices
Product # Description Price Quantity  
29341 USB 1.1 Over Cat5 Superbooster Extender Dongle Kit (TAA Compliant) $118.99