Automatically switch between two VGA Source devices on a single display
(2) VGA Female
(1) VGA Female
Product Description
The C2G 2-Port VGA Auto Switch is perfect for switching between two source devices connected to a single display. For example, in a learning, sharing and collaborating environment, the VGA Auto Switch allows a document camera and a PC to be connected to a single VGA input on the display. The switch may be set so that the PC is displayed until the document camera is powered on causing an automatic switch that will allow the document camera to be displayed. When the document camera is powered off, the switch will then allow the PC to be displayed.
The C2G 2-Port VGA Auto Switch has a small footprint allowing it to be placed in a convenient location for manual operation. No software is required for automatic or manual selection modes. The C2G 2-Port VGA Auto Switch features Extended Display Identification Data (EDID) copy, which ensures that the content from the source devices is sent to the display at the optimal resolution.
Signal Specifications • Video Signal Support - VGA • Maximum Video Resolution - 2048 x 1152
Power Adapter Specifications • Input Voltage - 100-240 VAC, 50~60Hz • Output Voltage/Amperage - 5V DC, 2A • Cable Length - 60in • Pin Diameter - 5.5mm OD, 2.5mm ID • Center Pin Polarity - Positive
Physical Characteristics • Video Inputs - VGA (HD15) Female x 2 • Video Outputs - VGA (HD15) Female x1 • Push Button - For Port Selection / EDID Copy x 1 • Slide Switch - For Port Selection in Priority / Manual Mode x 1 • Enclosure - Metal • Dimensions (HxWxD) - 0.87 x 2.95 x 2.32 in • Operating Temperature - 0~40C • Storage Temperature - 10~60C
Rated 3 out of 5 by Power from Magnification....I have 4 computers attached to this devise and everything is enlarged. Especially the task bars. I have found that I can reduce some things but not the task bars. How do I stop this magnification.?