Designed for superior performance, this keystone jack is available in several colors to match housing or allow color-coded port designation in compliance with TIA/EIA 568B 2.1 and ISO/IEC 11801 requirements. Includes 110-type IDC termination with strain relief caps, and comes standard with 50 µinch gold plating on the jack contacts.
Please Note: Our keystone jacks will work with our wall plates and surface boxes, or any standard keystone and angled multimedia wall plate or patch panel.
• Panel-type unshielded RJ45 (8P8C) keystone jack • Meets or exceeds industry standard Category 6/Class E according to TIA/EIA 568B 2.1 and ISO 11801 2nd edition • Toolless punchdown termination for 22-26 AWG UTP solid wire • Balances signal transmission of insertion loss and crosstalk from 1 to 250 MHz • Complies with FCC Part 68
Use for any unloaded keystone wall plate or patch panel.
• Cat6 keystone jack • Two plastic strain relief caps for IDC connector • Three color-coded designation dust covers with voice, data and Cat6 icons.
For immediate help, please with us!
Rated 4 out of 5 by Bender from Works GreatIn the process of installing a whole new A/V system at my house it seemed a great idea to also run network cables to various rooms and A/V components at the same time. I have 5 network connections now using these particular connectors and they really do work well. The only thing that took a moment to figure out was the placement of the conductors in the connector but after that first one, the remaining four were a breeze.
Date published: 2011-11-28
Rated 5 out of 5 by itdoug from Very easy punchdown with no toolsIt was super easy to punch down the cables. I found a video tutorial online and it only took about 5 min per jack to get the cables punched down. I would recommend a small flat head screw driver to push the cables down just a little so they don't pop out before closing the jack.