2-Port USB 1.1 Over Cat5 Superbooster Extender Wall Plate Receiver

4.52 Reviews
Product Features
Wall plate receiver extends USB 1.1 signals over Cat5 up to 150 feet over Cat5 and supports two USB devices when paired with a transmitter
• Extends two USB 1.1 signal up to 150ft over category cables
• Allows for flexible positioning of USB peripherals
• Receiver is built into wall plates
• Pair with a wall plate or dongle transmitter for complete solution
(2) USB-A Female
(1) RJ-45 Female
Product Description
One component of a complete solution that, when paired with a transmitter (sold separately), conquers USB length limits. This solution extends the signal of a USB device to a host computer up to 150 feet, enabling you to place your USB projector, camera, printer, web cam, hub or other USB device exactly where you want it! Our USB superbooster wall plate is powerful yet simple, with no drivers to install or special software required. It's also compatible with any computer that supports USB.

The overall plug-and-play solution consists of this wall plate receiver, and your choice of a compatible transmitter that is sold separately: the wall plate (#29344), the dongle (#29348) or the keystone insert (#29349). Customize the configuration to your specific needs! This versatility is ideal for applications where you need flexibility at your computer/source side.

The complete solution is connected via a standard Cat5, Cat5E, or Cat6 UTP cable (not included) that provides easy in-wall installation. This delivers a clean, finished look important for homes, classrooms, offices and anywhere you don't want visible cables lying around. Use pre-terminated network cables, or pull unterminated cable and use the included toolless IDC RJ45 connector to terminate your own cable. Because the USB superbooster wall plate is bus-powered, no external power source is required. Compliant with USB specification 1.1.

Input: Two USB Type A Female
Output: One RJ45 Female

Please Note: The power demands of devices such as external drives and USB hubs may require the use of external power for proper operation.

Note: If the USB signal is being extended to support an interactive whiteboard, then we recommend using our product 29338. For more information about this recommendation, read our application bulletin.

•Download the manual from the Support tab
•Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab
Warning symbol for P65 WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

Product Certifications
Tap an icon to learn more:
RoHS Compliant
Product Specifications
Color : White
UPC : 757120293453
Warranty : 1 Year
Vendor : C2G
Weight : 0.332 LB
•Download a PDF with the technical specifications of this product on the Support tab
System Requirements
• One superbooster transmitter: wall plate (#29344), dongle (#29348) or keystone insert (#29349) each sold separately

USB Specifications
• USB specification - USB 1.1
• USB transfer rates supported - Full Speed - 12Mbps, Low Speed - 1.5Mbps

Category Cable Requirements
• Category cables supported - Cat5, Cat5E, Cat6
• Cable pinouts supported - T568B - Recommended, T568A

Physical Characteristics
• USB connector - USB A Female x 2
• Data connector - RJ45 Female
• Wall plate insert dimensions - 2.61 x 1.31in
• Dimensions - 4.13 x 1.31 x 1.34in
Product Uses
Application Diagram

Diagram above shows how one input such as the PC can connect to the transmitter which distributes the signal to the 2-port receiver that then can connect to up to 2 outputs such as the USB Hub.
Package Contents
• One 2-port USB superbooster wall plate receiver
• One RJ45 toolless IDC connector
• Two #6x32 slotted/Phillips screws• User Guide
Product Support
• Download the manual

• Download the technical specifications
Customer Reviews

For immediate help, please with us!

Rated 4 out of 5 by Average Joe from Using for a USB wall-mounted camera We are building a webex/skype/video conference room and I wanted a wall mounted camera between dual wall mounted displays. To facilitate easy switching between laptops I chose a generic USB camera (also cheap!) and use these components to extend the USB distance. We have a transmitter mounted under the table feeding a port on top of the table then the CAT5 runs thru the floor and up the wall to a wall mounted receiver to connect the camera. Works slick!
Date published: 2010-04-27
Rated 5 out of 5 by Johnny G from Simplicity This is the 2nd time I've bought these wonderful UBS extenders. The first time was a single receiver, now I changed up to the double, as my office needs have grown. They are fantastic because they really work, no issues whatsoever.
Date published: 2019-02-13
  • y_2021, m_10, d_21, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_29345, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cablestogo
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 64ms
Questions & Answers

For immediate answers, please with us for help!

When paired with the transmitter 29344 how much power would be available from each USB port for charging portable devices?
Asked by: cnott
The charging power will be cut to less than half because the device also requires power to function.
Answered by: Tom
Date published: 2017-10-05
  • y_2021, m_10, d_21, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_29345, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_cablestogo
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 110ms