Conquer USB length limitations, and put your USB devices where you want them with our USB superbooster. This pocket-sized device extends the distance of a USB device to a host computer up to 150 feet so you can place your USB camera, printer, web cam, keyboard/mouse extension, or any other USB device exactly where you want it! This booster is powerful yet simple, with no drivers to install or special software required so it's compatible with any computer that supports USB.
This plug-and-play device consists of a base unit and a remote unit connected together by a standard Cat5, Cat5E, or Cat6 network cable (not included). Simply connect your cables to your device; then connect to your computer and USB peripheral and you're up and running. Bus-powered, it requires no external power source. Instead, the superbooster has internal DC power conditioning circuits to maintain the proper voltage to the remote device so no external power is required for either the base or remote units. Compliant with USB Specification 1.1.Please Note:
The power demands of devices such as external drives and USB hubs may require the use of external power for proper operation. Please consult with your device manual or manufacturer for details. During installation, do not connect the transmitter to the PC until all other connections in the system have been made. The other connections in this system would include the Cat5e/6 cable between the transmitter and receiver, a USB hub placed at the receiver or any other USB device that would be connected to the receiver. Connecting the transmitter to the computer without first making other connections may result in damage to the Superbooster.Note:
If the USB signal is being extended to support an interactive whiteboard, then we recommend using our product 29338
. For more information about this recommendation, read our application bulletin
One USB Type A Male and One RJ45 FemaleRemote Connectors:
One USB Type A Female and One RJ45 Female
When making any changes to the setup, follow these steps:
1. Disconnect the USB Superbooster transmitter from the computer.
2. Make any Superbooster system changes*
3. Ensure that the USB device is connected to the receiver and the Cat5 cable to both the transmitter and receiver before connecting the transmitter to the computer.
4. Connect the USB Superbooster transmitter to the computer.
*Note: Changes may include: swapping out boosters, troubleshooting any cable issues, etc.
•Download the manual from the Support tab
•Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab