Extends HDMI up to 230 feet over a single Cat5e, Cat6, or Cat6a cable and de-embeds audio from HDMI
• Extends HDMI, VGA, and Stereo Audio signals up to 230 feet • Utilizes a single Cat5e, Cat6 or Cat6a cable for extension • De-embeds audio from an HDMI A/V signal • Front panel push buttons to switch between HDMI and VGA inputs
The HDMI HDBaseT Over Cat Extender Kit - De-embedder is an ideal solution for extending HDMI Audio/Video signals from a Blu-ray™ player to a projector. This solution extends HDMI Audio/Video signals over a single Cat5e, Cat6, or Cat6a network patch cable up to 230 feet at a 1080p resolution. The built-in de-embedder splits the audio from HDMI video and converts it to a Stereo Audio output to support an audio system that is separate from the display. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. This solution utilizes TruChoice™ power, which allows power to be supplied over the Cat cable to both the transmitter and receiver from a single power adapter placed at either the transmitter or the receiver end of the solution. HDBaseT technology supports HDCP and allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display’s capabilities, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display. Built-in power surge protection and high ground loop immunity ensure high performance signal extension.
Note: Stranded Cat5e/6/6a patch cables may be used for HDMI extension applications up to 230ft. Shielded, solid conductor Cat6 or HDBaseT Certified Cat6a network cabling is recommended for applications where the category cable must be coiled, is run near other high-frequency signaling cables, or in high EMI/RFI environments. For best performance use a Cat6 Solid Shielded Patch Cable or an HDBaseT Certified Cat6a Patch Cable.