Shadow

4K HDMI® and VGA + Stereo Audio HDBaseT over Cat Extender Wall Plate Transmitter - White (TAA Compliant)

#29301

Product Features

Extend 4K HDMI and VGA up to 115ft over a single Cat5e, Cat6, or Cat6a network patch cable using HDBaseT technology
• Extend 4K HDMI (4096 x 2160 at 30Hz, 4:4:4) up to 115ft
• Extend 4K HDMI (4096 x 2160 at 60Hz, 4:2:0) up to 115ft
• Extend HDMI (1920 x 1080) up to 230ft
• Extend VGA (1920 x 1080) and Stereo Audio up to 230ft
• Utilizes a single Cat5e, Cat6 or Cat6a cable for extension
• Three methods for input switching: Auto, Manual, and Serial RS232
• TruChoice™ power allows for power at the transmitter or receiver end
• Compatible with any HDBaseT receiver from C2G
• Designed for easy connections in a wall box

Product Description

The HDMI® and VGA + Stereo Audio HDBaseT over Cat Extender Wall Plate Transmitter is an ideal solution for extending audio/video signals from a Blu-ray™ player and a laptop to a projector. This transmitter extends HDMI, VGA and Stereo Audio signals over a single Cat5e, Cat6 or Cat6a network patch cable up to 115 feet at a 4K (4096 x 2160 at 30Hz, 4:4:4) for HDMI and 230 feet at a 1080p resolution for VGA. The rear cable connections for the Cat cable and the optional serial cable are set at 90°, making connections in a wall box easy. The local HDMI output of the front of the wall plate allows an additional HDMI display to be supported via an HDMI cable. Switching between HDMI and VGA inputs is made easy with three options available. Automatic switching displays the last connected device, manual switching via the button on the front of the wall plate, or Serial RS232 switching which accepts serial commands from a control device, like our TruLink® A/V Controller This solution is compatible with any operating system and is truly plug and play with no drivers or software required. This solution utilizes TruChoice™ power, which allows power to be supplied over the Cat cable to both the transmitter and receiver from a single power adapter placed at either the transmitter or the receiver end of the solution. HDBaseT technology supports HDCP and allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display’s capabilities, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display. Built-in power surge protection and high ground loop immunity ensure high performance signal extension. This transmitter is compatible with any of the HDMI HDBaseT receivers offered by C2G and works with our DB9 to RJ25 Serial RS232 Cables.

Note: Stranded Cat5e/6/6a patch cables may be used for HDMI extension applications up to 230ft. Shielded, solid conductor Cat6 or HDBaseT Certified Cat6a network cabling is recommended for applications where the category cable must be coiled, is run near other high-frequency signaling cables, or in high EMI/RFI environments. For best performance use a Cat6 Solid Shielded Patch Cable or an HDBaseT Certified Cat6a Patch Cable.

• Download the manual from the Support tab
• Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab

HDBaseT
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

Product Certifications

Tap an icon to learn more:
TAA

Product Specifications

Color : Black
UPC : 757120293019
Warranty : 3 Years
Vendor : C2G
Weight : 1.872 LB
Electrical Specifications

• Maximum Distance Supported: 230ft (70m) at 1920 x 1080
• Maximum Distance Supported: 115ft (35m) at 4096 x 2160
• Maximum Resolution Supported: 4096 x 2160 (UHD—HDMI), 1920 x 1200 (VGA)
• Supports: HDCP, HDBaseT, Serial Control
Power Adapter

• Input Voltage: 100-240 VAC, 50~60HZ
• Output Voltage/Amperage: 0.6A, 18VDC, 1.0A
• Cable Length: 1530±100mm
• Plug Diameter: 4.75mm, ID=1.7mm
• Center Pin Polarity: Positive
Physical Specifications

• Operating Temperature: 0~40°C; 0-80%RH (Non-condensing)
• Storage Temperature: -10~60°C; 0-80%RH (Non-condensing)

Product Support

Downloads

•Download the manual
•Download the technical specifications
Audio Troubleshooting

Symptom/Problem:
No audio or distorted audio from the 3.5mm Stereo Audio input port
Solution:
Cycle power to the wall plate transmitter while a VGA and 3.5mm Stereo Audio device, such as a laptop, is connected and transmitting a signal to the wall plate. Use one of the methods described below to cycle power to the wall plate transmitter.
• If the AC power supply is connected to the power input of the wall plate transmitter, then disconnect and reconnect the AC power supply from the wall outlet
• If the AC power supply is connected to the receiver, then disconnect and reconnect the AC power supply from the wall outlet or disconnect and reconnect the Cat5 cable from the wall plate transmitter.
• Press and hold the Select button on the front of the wall plate transmitter for five seconds to power off the wall plate and then press and hold the Select button for an additional five seconds to power on the wall plate.
Customer Reviews

For immediate help, please with us!

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 24ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Questions & Answers

For immediate answers, please with us for help!

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 40ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;