• Your Cart Is Empty
Shop our products to find what you need.

HDMI® and VGA + Stereo Audio to HDMI HDBaseT over Cat5 Extender Kit (TAA Compliant)


Product Features

Complete solution for extending HDMI, VGA and Stereo Audio signals up to 230 feet over a single Cat5 network patch cable using HDBaseT technology
• Perfect for extending audio/video signals from a Blu-ray™ player and a laptop to a projector
• Three methods for input switching: Auto, Manual, and Serial RS232
• TruChoice™ power allows for power at the transmitter or receiver end
• Compatible with any HDBaseT receiver from C2G
• Designed for easy connections in a wall box
• Kit includes both the transmitter and receiver units

Product Description

The HDMI® and VGA + Stereo Audio to HDMI HDBaseT over Cat5 Extender Kit is a complete solution for extending audio/video signals from a Blu-ray™ player and a laptop to the HDMI input of a projector. This kit extends HDMI, VGA and Stereo Audio signals over a single Cat5/Cat5e/Cat6 unshielded twisted pair network patch cable up to 230 feet at a 1080p resolution. The rear cable connections for the Cat5 cable and the optional serial cable are set at 90°, making connections in a wall box easy. The local HDMI output of the front of the wall plate allows an additional HDMI display to be supported via an HDMI cable. Switching between HDMI and VGA inputs is made easy with three options available. Automatic switching displays the last connected device, manual switching via the button on the front of the wall plate, or Serial RS232 switching which accepts serial commands from a control device, like our TruLink® A/V Controller This solution is compatible with any operating system and is truly plug and play with no drivers or software required. This solution utilizes TruChoice™ power, which allows power to be supplied over the Cat5 cable to both the transmitter and receiver from a single power adapter placed at either the transmitter or the receiver end of the solution. HDBaseT technology supports HDCP and allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display’s capabilities, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display. Built-in power surge protection and high ground loop immunity ensure high performance signal extension.

Note: Stranded Cat5e/6 patch cables may be used for HDMI extension applications up to 230ft. Shielded, solid conductor Cat5e/6 network cabling is recommended for applications where the Cat5e/6 cable must be coiled, is run near other high-frequency signaling cables, or in high EMI/RFI environments. For best performance use a Cat6 Solid Shielded Patch Cable

• Download the manual from the Support tab
• Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab

Tap an icon to learn more:
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

Product Specifications

Color : Black
UPC : 757120292180
Warranty : 3 Years
Vendor : C2G
Weight : 3.413 LB
Electrical Specifications

• Maximum Distance Supported: 230ft (70m) at 1920 x 1080
• Maximum Distance Supported: 115ft (35m) at 3840 x 2160
• Maximum Resolution Supported: 3840 x 2160 (UHD—HDMI), 1920 x 1200 (VGA)
• Supports: HDCP, HDBaseT, Serial Control
Power Adapter

• Input Voltage: 100-240 VAC, 50~60HZ
• Output Voltage/Amperage: 0.6A, 18VDC, 1.0A
• Cable Length: 1530±100mm
• Plug Diameter: 4.75mm, ID=1.7mm
• Center Pin Polarity: Positive
Physical Specifications

• Operating Temperature: 0~40°C; 0-80%RH (Non-condensing)
• Storage Temperature: -10~60°C; 0-80%RH (Non-condensing)

Package Contents

• HDMI, VGA, and Stereo Audio Transmitter
• HDMI Receiver
• Face Plate - White
• Terminal Block to DC Jack Adapter
• Power Adapter
• Screw Pack
• 4ft RJ11 Cable
• 4ft RS232 DB9 Cable
• RJ11 to RS232 DB9 Adapter
• HDMI Cable Tie
• User Manual

Product Support


•Download the manual
•Download the technical specifications
Audio Troubleshooting

No audio or distorted audio from the 3.5mm Stereo Audio input port
Cycle power to the wall plate transmitter while a VGA and 3.5mm Stereo Audio device, such as a laptop, is connected and transmitting a signal to the wall plate. Use one of the methods described below to cycle power to the wall plate transmitter.
• If the AC power supply is connected to the power input of the wall plate transmitter, then disconnect and reconnect the AC power supply from the wall outlet
• If the AC power supply is connected to the receiver, then disconnect and reconnect the AC power supply from the wall outlet or disconnect and reconnect the Cat5 cable from the wall plate transmitter.
• Press and hold the Select button on the front of the wall plate transmitter for five seconds to power off the wall plate and then press and hold the Select button for an additional five seconds to power on the wall plate.
Customer Reviews

For immediate help, please with us!

Rated 5 out of 5 by from ONE AMAZING PRODUCT I have been using C2G products for years and I had my ups and downs with some products - some didn't work like the should have and some worked perfectly like they supposed to. but his product surprised me - I am a very Savvy A/V Designer/installer/Configurator and most of the time I do take things above their limits even if the manufacturer didn't recommend it. and 99% of the time I succseed . my story: I installed two Plenum RapidRun Cables in the floor monument of my conference room and for the past two years they worked on and off they were very unreliable of course if I am always there I can make them work but if you are a co-worker and don't know much about AV they usually get stuck. then I decided to go for CAT5e/CAT6 Solutions - this product is KING and I would recommend it to any company's conference room in needs of a reliable AV solutions. in fact it is a standard product for me and my clients - you only need 1 CAT5e/CAT6 Cable but in tight places I run Two For redundancy reason or if the client needs anything else down the line. This Product combines Legacy VGA and Audio into HDMI on the fly at 1080P it has a built in smaller - I Used to purchase a $1000 Scaler just to do this. It has an additional HDMI local monitor port. If you saw what I am doing with this product incorporating Conferencing system and Cable TV into it, it will blow your mind.
Date published: 2017-01-13
  • y_2018, m_7, d_20, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_29218, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cablestogo
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 191ms
Questions & Answers

For immediate answers, please with us for help!

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 545ms
  • bvseo-msg: Execution timed out, exceeded 500ms;