Connect Serial ATA devices to your motherboard or host controller; for transfer rates up to 6G
• Supports transfer rates up to 6 Gbps • Secure, angled connectors for versatility • Available in lengths up to 36in
(1) SATA 7-pin Male
(1) SATA 7-pin Male
When connecting serial ATA devices to your motherboard or host controller, you want a permanent solution. The last thing you need is a cable that could fatigue, or even fail over time, because of bending or stress occurring right at the critical connection. Our angled connectors deliver the cable at a more desired angle and are fortified to keep the cable lined up straight. So you'll see less cable bend and fatigue for longer cable life.
SATA 3.0 compatible with transfer rates up to 6 Gbps! This serial ATA cable is especially designed to handle the differential signals implemented in today's technology, while delivering increased throughput and reduced data packet loss.
With our 7-pin, 1-device cable, you'll receive higher data transmission rates, reduced crosstalk, and improved signal integrity.
Plus, this cable reduces overheating and saves internal space within the CPU unit for easy movement when adding or removing hard drives, PCI cards or other adapters. Our serial ATA cable can minimize clutter, increase airflow and maximize your potential transfer rate.
I have purchased several #10189 SATA cables which claim to be 6 inches in length. They actually measure 6.5 inches from the rear of each connector. Do you make one that is 6 inches and has two right angle plugs that face opposite to one another? (one f...
I have purchased several #10189 SATA cables which claim to be 6 inches in length. They actually measure 6.5 inches from the rear of each connector. Do you make one that is 6 inches and has two right angle plugs that face opposite to one another? (one faces up and the other faces down. Thanks, Robert
Asked by: robhuck
The 6in is the length of the cable not including the connector. The only two right angled SATA cable we carry is 18in (#10182).