text.skipToContent text.skipToNavigation

Discontinued - LANtest Network/Modular Cable Test Kit

#13138 C2G

LANtest Network/Modular Cable Test Kit is rated 3.8 out of 5 by 8.

Test cable installations up to 200 meters (656 feet). The simplest and most affordable wire-mapping device for networking cables available on the market. Use it to read the actual wiring configuration for Cat5, coaxial and modular telephone cables by comparing one transmitting end to another receiving end. Easy verification for cabling faults including discontinuity, open wires, shorts, miswiring and crossed pairs is quickly detected with the LANtest's unique LED display. Can also test the grounding. Perform all the above tests on installed cables with the included remote terminator.

Tests the correct pin configuration of 10Base-T, 10Base-2, Thin ethernet cable, RJ45/RJ11 modular cables 356A, TIA-568A/568B and Token Ring cable, etc. With the remote kit, LANtest can remotely test cable up to 1000 feet away either on the wall plate or the patch panel. Includes an auto or manual scan for pinout indicators, and a power switch for saving battery power.

Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.
Send
Save as PDF

Features

Supports up to 200 meters (656 feet) for testing cable installations
Allows for reading the actual wiring configurations for Cat5, coaxial and modular telephone cables
Ability to verify cabling faults including discontinuity, open wires, shorts, miswiring and crossed pairs
Includes an auto or manual scan for pinout indicators, and a power switch for saving battery power

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

Specifications

General Info

Color	White
Type	Kit, Tester
Application Sector	Commercial, Residential
Product Line	C2G
Country Of Origin	China
UPC Number	757120131380

Resources

Cutsheet

13138 Cutsheet

pdf

Reviews

Rated 4 out of 5 by danh from a nice test kit This tester saved me a lot of time while wiring my home. It consistently reported switched wires (argh) and short wires (ugh) before I committed to the line. I call it well worth the money.

Date published: 2010-01-26

Rated 4 out of 5 by Rick from Easy to Use Great product and easy to use and understand.

Date published: 2010-06-11

Rated 4 out of 5 by GW from Great product product seems sturdy. works as advertised

Date published: 2010-06-11

Rated 1 out of 5 by Ryan the ISP from Does not return stats to main unit. This tester, when using the remote unit, does not tell you on the main unit if there is continuity to the remote unit. You have to physically see the remote unit to verify continuity.

Date published: 2013-09-25

Rated 4 out of 5 by GMAN from Works Well The tester is easy to use but you can not use on live wires. Lan wire connections that run throughout a building need to have a tester that can handle live testing. Great for 5 or less wires in a system.

Date published: 2012-06-27

Rated 5 out of 5 by Ed from Best bang for the buck Very practical for the everyday wiring. With the 8 LED pair display is evident at a glance if there are no connectivity, shorts, reversed pairs or any other pinout issue.

Date published: 2010-09-28

Rated 4 out of 5 by razcal from Easiest Lan tester to use Much better tester than I have purchased. Platform irrelevant as I use both Linux and pc. Almost as good as if you had a magic wand. Thanks.

Date published: 2015-10-19

Rated 4 out of 5 by IT guru from Great Test Kit This test kit helped us to quickly resolve a CAT5 cable problem. It is easy to use, although the instructions leave a lot to be desired.

Date published: 2011-07-20