35ft (10.7m) Cat6a Snagless Shielded (STP) Ethernet Network Patch Cable - Black
#00722
C2G
Bazaarvoice SAP Hybris Integration Version 2.8.1
$52.99 $73.99 MSRP USD
This Snagless Shielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and will protect a high speed 10 Gigabit network connection from noise and electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications and drastically reduces both impedance and structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a component requirements.
Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable and plugs, this design minimizes Near-End Crosstalk (NEXT) levels. Available in a variety of colors to easily color-code a network installation. Individual length label on each cable for ease of use.
Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable and plugs, this design minimizes Near-End Crosstalk (NEXT) levels. Available in a variety of colors to easily color-code a network installation. Individual length label on each cable for ease of use.
Connector 1:
(1) RJ-45 Male
Connector 2:
(1) RJ-45 Male
Quantity
238 In Stock
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
- Send
- Save as PDF
Features
- Designed for network adapters, hubs, switches, routers, HDBaseT applications and more
- Supports 10 Gigabit networks up to 328ft for fast data transmission and maximum performance
- Meets the ANSI/TIA-568-C.2 Cat6a requirements for supporting a wide variety of applications
- Constructed with shielded twisted pair (STP) wires, designed to protect a high speed network from noise and electromagnetic interference
- Snagless connector design for high density environments and protecting the RJ-45 connector's lock
- Available in a variety of colors to color-code a network
 
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Specifications
General Info
Product Line | C2G | ||
Color | Black | ||
UPC Number | 757120007227 | ||
Country Of Origin | Vietnam | ||
Features | PoE (Power Over Ethernet) | ||
Application Sector | Commercial, Industrial, Residential | ||
Warranty Type | Lifetime | ||
Type | Cable |
Dimensions
Product Length US | 35.0 FT | ||
Cable Length | 35 ft | ||
Outside Diameter | 6.09 mm |
Additional Information
RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Listing Agencies / 3rd Party Agencies
CE Certified | Yes | ||
REACH Compliant | Yes |
Technical Information
Jacket Material | PVC (Polyvinyl Chloride) | ||
Category Performance Rating | Cat 6a | ||
Wire Gauge | 26 AWG | ||
Bend Radius | 49.6 mm | ||
Shielded/Unshielded | Shielded | ||
Conductor | 4-Pair Twisted | ||
Shield Type | STP | ||
Cable Type | Ethernet Patch Cable | ||
Jacket Rating | Standard / Non-Rated | ||
Cable Diameter | 6.2 mm | ||
Connector Type | Booted, Snagless | ||
Indoor/Outdoor | Indoor | ||
Operating Temperature | -20°-80°C | ||
Insulation Material | FMPE (Foam Polyethylene) | ||
Storage Temperature | -20° - 80° C |
Resources
Cutsheet
Data Sheet
Supporting Document
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
What are the overall length tolerances for 3 and 4 foot cables? 00640 and 00641
The tolerance of these cables are +152mm/-52mm.
Date published: 2018-05-07
Bazaarvoice SAP Hybris Integration Version 2.8.1