


2ft (0.6m) Cat6a Snagless Unshielded (UTP) Ethernet Network Patch Cable - Blue
#00690
C2G
Bazaarvoice SAP Hybris Integration Version 2.8.1
$8.99 $13.99 MSRP USD
This Snagless Unshielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and enables 10 Gigabit data transmission over a 4 pair copper cable allowing connections up to 100 meters. Current Cat6 cabling systems may only support 10 Gigabit Ethernet over limited distances. Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a channel requirements.
Constructed from high quality cable and plugs, this design offers improved alien cross talk performance. The Snagless hood is ideal for high density switch applications. Available in a variety of colors to easily color-code a network installation. Individual length label on each cable for ease of use.
Constructed from high quality cable and plugs, this design offers improved alien cross talk performance. The Snagless hood is ideal for high density switch applications. Available in a variety of colors to easily color-code a network installation. Individual length label on each cable for ease of use.
Connector 1:
(1) RJ-45 Male
Connector 2:
(1) RJ-45 Male
Quantity
3616 In Stock
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Designed for network adapters, hubs, switches, routers, HDBaseT applications and more
- Supports 10 Gigabit networks up to 328ft for fast data transmission and maximum performance
- Meets the ANSI/TIA-568-C.2 Cat6a requirements for supporting a wide variety of applications
- Constructed with unshielded twisted pair (UTP) wires, designed to counter EMI, RFI, and crosstalk
- Snagless connector design for high density environments and protecting the RJ-45 connector's lock
- Available in a variety of colors to color-code a network
Specifications
General Info
Product Line | C2G | ||
Color | Blue | ||
UPC Number | 757120006909 | ||
Country Of Origin | Vietnam | ||
Features | PoE (Power Over Ethernet) | ||
Application Sector | Residential, Commercial, Industrial | ||
Warranty Type | Lifetime | ||
Type | Cable |
Dimensions
Product Length US | 2.0 FT | ||
Cable Length | 2 ft |
Technical Information
Jacket Material | PVC (Polyvinyl Chloride) | ||
Wire Gauge | 26 AWG | ||
Cable Type | Ethernet Patch Cable, Booted, Snagless, Unshielded (UTP) | ||
Jacket Rating | Standard / Non-Rated |
Resources
Cutsheet
Supporting Document
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
What is the bandwith capacity of these cables?
Hello Cat6a cables can support speeds of up to 10Gbps up to approximately 90 meters at maximum data transfer rate.
Date published: 2023-11-13
is the AWG important when I run 400 feet of ethernet cat6 cables ( from modem to router going thru outdoor setting???
Yes, AWG is important, but not as important as type of cabling, shielding, and use. Max length of a Category cable run is 230ft. Solid cable carries longer distance with less loss, and the larger the AWG, the better the signal carry, and shielded carries farther without interference. For outdoor use, you would want to use specific outdoor cabling.
Date published: 2021-02-22
overall cable diameter for Cat6a UTP network patch cables e.g., C2G #00976
6mm is the Diameter
Date published: 2017-10-05
Are these cables certified to any of the IEEE standards of IEEE 802.3af, IEEE 802.3at, or IEEE 802.3bt?
Bazaarvoice SAP Hybris Integration Version 2.8.1