2ft (0.6m) Cat5e Snagless Unshielded (UTP) Ethernet Network Patch Cable - Yellow
#00430
C2G
Bazaarvoice SAP Hybris Integration Version 2.8.1
$2.99 $2.99 MSRP $1.85 USD
For fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat5e TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation.
Connector 1:
(1) RJ-45 Male
Connector 2:
(1) RJ-45 Male
Quantity
204 In Stock
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
- Send
- Save as PDF
Features
- Snagless design protects clips when plugging and unplugging
- Standard RJ45 connectors and unshielded twisted pair wires
- Available in 10 colors to color-code a network
- Available in lengths up to 150ft
 
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Specifications
General Info
Product Line | C2G | ||
Color | Yellow | ||
UPC Number | 757120004301 | ||
Country Of Origin | Vietnam | ||
Application Sector | Commercial, Industrial, Residential | ||
Warranty Type | Lifetime | ||
Type | Cable |
Dimensions
Product Length US | 2.0 FT | ||
Cable Length | 2 ft | ||
Outside Diameter | 5.3 mm |
Additional Information
RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Listing Agencies / 3rd Party Agencies
CE Certified | Yes | ||
REACH Compliant | Yes |
Technical Information
Jacket Material | PVC (Polyvinyl Chloride) | ||
Category Performance Rating | Cat 5e | ||
Wire Gauge | 24 AWG | ||
Shielded/Unshielded | Unshielded | ||
Shield Type | UTP | ||
Cable Type | Ethernet Patch Cable | ||
Jacket Rating | Standard / Non-Rated | ||
Cable Diameter | 5.3 mm | ||
Connector Type | Booted, Snagless | ||
Indoor/Outdoor | Indoor | ||
Bandwidth | 350 mHz |
Resources
Cutsheet
Data Sheet
Supporting Document
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Can buyers get the test report created by the Fluke device and software specifically for the cable bought?
Our cables are tested for compliance after they are created but we do not use a FLUKE Device for testing.
Date published: 2024-09-29
What is the cable diameter? I need a cable diameter approximately 3.5MM (1/8")
The cable OD is 5.5mm. We do not carry a Cat5e cable with a 3.5mm OD.
Date published: 2024-09-29
Hi, I would like to have the pinout for your part number 15211 cable assembly. I see the color pairs but no pin numbers to attach them to.
Our pin out for every category cable on our site is 568b. We use this standardized category pin out for all category cables outside of crossover cables.
Date published: 2024-09-29
Hello, what is the tolerance on the overall length?
+50mm or -25mm
Date published: 2024-09-29
My room is far away from the router and I might have to take the ethernet cable outside and through my upstairs window would the cold have any effect on the cable, or my connection, or any interference with the connection?
I would not think the cold work affect the cable. I would be more concerned with the sunlight or rain/snow. The cable is not outdoor rated. There are specific cable that have an outdoor rated jacket. Unfortunately, we do not carry outdoor rated Cat5e cables.
Date published: 2017-10-06
What is the country of Origin for this item?
The country of origin for part 24229 is China.
Date published: 2024-09-29
Will this cable work to connect my Airport Extreme to my Mac desktop computer ?
Yes, that would allow you to connect the Airport Extreme to a Mac desktop.
Date published: 2024-09-29
Bazaarvoice SAP Hybris Integration Version 2.8.1