RG6 Quad Compression F-Type Connector with O-Ring Multipack (10-Pack) (TAA Compliant)
#41075
C2G
RG6 Quad Compression F-Type Connector with O-Ring Multipack (10-Pack) is rated
out of
5 by
6.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$11.99 $18.99 MSRP USD
Quickly becoming the standard in satellite and cable television installation, our compression connectors provide reliable connections with a high resistance to moisture. High frequency, these are compatible with digital cable and satellite. The bright nickel finish withstands harsh environments, and reduces the effects of oxidation.
An o-ring in the nut and a tapered plastic ferrule provide a barrier to moisture migration through the threads and under the cable jacket that would otherwise damage the cable. Use item #38011, our 3-in-1 compression tool, for easy installation.
An o-ring in the nut and a tapered plastic ferrule provide a barrier to moisture migration through the threads and under the cable jacket that would otherwise damage the cable. Use item #38011, our 3-in-1 compression tool, for easy installation.
Connector 1:
(1) F-Type Male
Quantity
18 In Stock
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
- Send
- Save as PDF
Features
- Provides a reliable connection which is resistant to moisture
- Compatible with digital cable and satellite signals
- Designed for use with quad shield RG6 cable
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Specifications
General Info
| Product Line | C2G | ||
| UPC Number | 757120410751 | ||
| Country Of Origin | Taiwan, Province Of China | ||
| Application Sector | Commercial, Residential | ||
| Warranty Type | Lifetime | ||
| Type | Connector |
Dimensions
| Product Length US | 1.2 in |
Buy American Act Compliance
| TAA Compliant | Yes |
Technical Information
Resources
Cutsheet
Reviews
Rated 5 out of
5
by
Danikrom from
Great deal, work great!
These work beautifully, and I would buy them again should I need them.
Two words of advice:
1) Get a few extras, particularly if you've never used a compression tool before. I messed up just one of them, out of about 35 I had to do, so it's not hard to figure out.
2) I did get a blister in my thumb, after "wiggling" in the first 20 or so unto the coax cable. So wear gloves or use some tool to get these on the cable prior to using the compression tool to lock them in place.
Date published: 2011-05-09
Rated 5 out of
5
by
TML from
Great improvemnt
I fabricate coax cables , maybe once every 10 years & it has always been a hassle to get a tight reliable connector connection, for me at least.
Picked a few of these at HD and they worked 1st no hassle - have another set of runs to fabricate to a ordered a sack of them
Date published: 2009-09-23
Rated 4 out of
5
by
Tom from
RG6Q connectors and crimping tool
Getting crimp connectors to fit over the thick insulation of the RG6Q cable is very difficult. C2G sent me a detailed description of their recommended procedure. It was different from the instructions on the package and worked better. If you buy these connectors, make sure you buy the crimping tool with them.
Date published: 2012-11-03
Rated 5 out of
5
by
mark from
good product
easy to use, consistent, performs well
Date published: 2010-01-04
Rated 4 out of
5
by
Billy Blues from
A Decent Connector
I needed to use a few more times to get a better handle on the crimp.
Date published: 2009-07-22
Rated 3 out of
5
by
Chicago Marine from
Not pleased with the endurance of the pr
Every time I used my special compression tool made for the specific connector the compression plastic part fall apart
Date published: 2012-03-22
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Bazaarvoice SAP Hybris Integration Version 2.8.1