text.skipToContent text.skipToNavigation

DISCONTINUED: Wireless A/V for HDMI® Devices (TAA Compliant)

#29329 C2G
Wireless A/V for HDMI® Devices is rated 5.0 out of 5 by 4.
  • y_2022, m_9, d_29, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_29329, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cablestogo
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 45ms
  • REVIEWS, PRODUCT

Always start a meeting or class on time with the Wireless A/V for HDMI devices kit. This plug and play system allows A/V signals from a laptop, tablet, or Blu-ray player to wirelessly connect to two HDMI projectors or HDTVs located up to 100 feet away.

Straightforward install
There is no need for cables to be run under the floor, through the ceiling, or up a wall. Mount the receivers near the displays and the transmitter near the presenter, then make the connections for HDMI and power on both the transmitter and receivers. This do-it-yourself solution includes all the components required for the setup and does not require an experienced A/V installer. Just plug an HDMI cable into your laptop from the transmitter, and you are ready to present. This kit offers true plug and play operation, allowing any presenter to step up and start a meeting with no lost time. There is no software to install or update, so there is no need to request permissions from IT or wait for drivers to download.

Effortless huddle space connectivity
Just bring your own device to the huddle space and plug in. This simple, one connection solution allows for quick transition from one user to another – encouraging productivity, inspiration, and teamwork while presenting ideas. Any room can be retrofitted to be a huddle space, as the secure wireless transmission of A/V signal does not require new cables or existing cable infrastructure.

De-cluttered conference room
Set up a conference room without limitations using this wireless system. The displays do not have to be limited to where wire runs have been located. Place displays anywhere within 100 feet of the transmitter to achieve the optimal setup for any conference room.

Trouble free classroom setup
Setting up A/V equipment in a classroom often requires running cables in wall or plenum space, this type of install requires specially rated cables and professional installation. With the Wireless AV for HDMI solution there is no need to run these costly wires. The straightforward installation takes almost no time to setup and the simplified operation ensures all staff members can use it without training.

Note: The transmitter and receivers do not require line-of-sight to function. However to achieve the 100ft maximum range, reduce or eliminate the number of obstacles between the transmitter and receivers.
Connector 1:
(1) HDMI Female, (1) USB Micro-B Female
Connector 2:
(1) HDMI Female, (1) USB Micro-B Female
Color Black
WHERE TO BUY

Features

  • • Wirelessly transmit HDMI signal up to 100ft
  • • Supports up to 1080p resolution
  • • Plug and Play#no driver required
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

Specifications

General Info
Product Line C2G
Color Black
UPC Number 757120293293
Country Of Origin Taiwan, Province Of China
Application Sector Residential, Commercial
Type Extender
Technical Information
Video Resolution 1080p
Data Transfer Rate 4.95 Gbps

Reviews

Rated 5 out of 5 by from Easy Peasy Setup was a breeze. Plug in and it automatically connected and connects after shutting down ether source or monitor.
Date published: 2020-06-25
Rated 5 out of 5 by from Even I could install this! Not IT savvy at all and I set this up with no problem. Used it immediately and...it works!
Date published: 2019-06-14
Rated 5 out of 5 by from Cost Effective and Time Efficient This all-inclusive kit was easy to install and easy to get connected. The inexpensive cost of the kit helps set it apart from competitor's offerings while simultaneously hiding the excellent quality of the hardware. This is a must-have for easily setting up huddle or meeting rooms where wiring is cost-prohibitive. Highly recommended!
Date published: 2020-11-17
Rated 5 out of 5 by from Easy to set up. Fast connections. I needed this to connect my mac to two 75 " touch screens in our cafeteria wirelessly. We were over 40' away and the response time was lightning fast. We did not have reviews to purchase this product.
Date published: 2019-03-01
  • y_2022, m_9, d_29, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_29329, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cablestogo
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 35ms
  • REVIEWS, PRODUCT

Questions & Answers

Is there a way to factory reset, mine is not working as intended

Asked by: Lee
To rest the item please see the repairing feature in the manual. I will provide the link below. For alternate help please reach out via Email or Phone or Chat @ C2G.com M-F 9am-6pm Est. https://www.cablestogo.com/docs/manuals/20001_-_30000/29329.pdf
Answered by: Thomas
Date published: 2022-02-18

What is the max amount of sets one can use in a school setting? I.e rooms next to each other.

Asked by: Paulkat
The general rule is to only use 2 with in the same building or with in a couple hundred feet of each-other.
Answered by: Thomas
Date published: 2018-05-17

can a laptop with a display port output (using a display port to HDMI cable) be used with the transmitter?

Asked by: RobM
Using this type of adapter would be fine to use as the signal coming from the adapter is HDMI. Be sure to test the converter or adapter you are using, as using any type of converter or adapter we can not guarantee connectivity.
Answered by: Thomas
Date published: 2018-05-03

Most new displays turn off or enter a sleep mode automatically when no signal is present. It appears as though the transmitter is always sending a signal so the display never shuts off. Is there a way to rectify this issue?

Asked by: ConfGuy
You would have to disconnect the power from either the Transmitter or Receiver. I would suggest doing it on the Transmitter.
Answered by: Paul
Date published: 2018-01-30

Are there any complications if using this with an HDMI to DVI adapter on the projector end? I realize it won't pass audio, but that shouldn't matter just looking for video.

Asked by: bad_the_ba
there should not be any complications as long as your adapter does not require power from the HDMI bus of the source.
Answered by: Thomas
Date published: 2017-11-15

Can you pair multiple receivers with one transmitter?

Asked by: Mike
This is a one to one device
Answered by: Tom
Date published: 2017-10-05

Do I need direct line of site? Need something to connect to my security dvd and broadcast output on a tv upstairs. It would be less than 100 ft. but not in the same room.

Asked by: anonymous
This device can work, but the maximum recommended distance is 100ft with out any obstacles in the way.
Answered by: Tom
Date published: 2017-10-05

Is it possible to configure the standby screen (the one that display when the receiver/transmitter are paired but there is no device plugged into the transmitter)? Currently, in this situation, it displays a static image on the screen and I'm worried a...

Is it possible to configure the standby screen (the one that display when the receiver/transmitter are paired but there is no device plugged into the transmitter)? Currently, in this situation, it displays a static image on the screen and I'm worried about burn-in
Asked by: GK
This is locked image and you can not change this screen.
Answered by: Tom
Date published: 2017-10-05
  • y_2022, m_9, d_29, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_en_US, sid_29329, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_cablestogo
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 86ms
  • QUESTIONS, PRODUCT