6ft (1.8m) USB to DB25 Serial RS232 Adapter Cable
#22429
C2G
USB to DB25 Serial RS232 Adapter Cable is rated
out of
5 by
24.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$34.99 $43.99 MSRP USD
This adapter cable enables high speed serial data transfer up to 115.2 K between the USB and the traditional RS-232 serial port. Since this adapter uses no IRQs, it is ideal for when you need many serial devices attached to your PC. Just connect your computer's or hub's USB port with a digital camera, modem, ISDN-TA modem, barcode reader, Palm III and V, tablet, label writer, fingerprint verification, security system, POS equipment or any of your favorite serial devices. This adapter cable is a perfect accessory for Microsoft® Surface® products and other leading laptops and tablets.
Please Note: This product creates a virtual serial port. It is not intended to connect a parallel printer/device to a USB port.
Discover more connectivity solutions for the Microsoft Surface
Please Note: This product creates a virtual serial port. It is not intended to connect a parallel printer/device to a USB port.
Discover more connectivity solutions for the Microsoft Surface
Connector 1:
(1) USB-A Male
Connector 2:
(1) DB25 Male
Quantity
784 In Stock
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
Specifications
General Info
Product Line | C2G | ||
Color | Blue | ||
UPC Number | 757120224297 | ||
Country Of Origin | China | ||
Features | RS232 | ||
Application Sector | Commercial, Residential | ||
Warranty Type | 5-Year | ||
Type | Active Device, Adapter, Cable |
Dimensions
Product Length US | 6.0 FT | ||
Cable Length | 6 ft |
Technical Information
Jacket Material | PVC (Polyvinyl Chloride) | ||
Wire Gauge | 24 AWG | ||
Cable Type | Adapter, Serial, USB | ||
Amperage | 100 mA | ||
Data Transfer Rate | 480 Mbps |
Reviews
Rated 3 out of
5
by
rpug from
Just be sure the jack screws are what you want
I have the same problem as others where the female jack screws interfere with female jack screws on my mating bulkhead connector. Since they are not screwed in, but peened in place and completely over-molded, I cannot remove them without destroying the housing. So this is just a warning to be sure that the mechanical configuration is exactly what you need or at least something that you can adapt to. Everything else is good. The Windows driver installs fine on Windows 10 and the cable is high quality.
Date published: 2019-08-14
Rated 4 out of
5
by
rogstr from
Works well after modification
I bought this cable to go between a Kantronics 3 Plus TNC and my laptop. The D25 end of the cable has lugs that have to be wrestled off before it will fit on the TNC. It was not easy. It would be helpful if the lugs were made to be removed more easily.
Date published: 2011-02-03
Rated 5 out of
5
by
Mary - Purchasing from
Simple and effective
The cable was used to connect an 8-port gauge input box to a small cpu which only had USB ports.
The cable hardware driver is easy to load,and takes only a few seconds to setup on the computer. The cable connected our hardware to CPU without a flaw.
The only issue we had with the cable was the threaded tabs on the RS-232 side had to be cut off to allow room to plug into the hardware. Easily taken care of though.
Date published: 2011-02-17
Rated 4 out of
5
by
CNC Programmer from
Works well for CNC DNC
Works well once you know the quirks.
Any usb memory drives in use causes the pc to reassign the COM port number. Requiring a software setting to be changed.
Got to reboot the pc if auto shutdown occurs, otherwise pc won't load driver.
Need to add 96 bytes minimum at end of file, after %, to ensure that the buffer empties into CNC.
Far more reliable than the old 9 pin com ports.
Date published: 2011-09-01
Rated 4 out of
5
by
TCI Steve from
Worked right out of the box
I unpacked it, connected it to my Dell Inspiron 9400 laptop left side USB port, let Windows do its thing and then connected the DB25 end to a Sun Microrystems Ultra 10 with a DB25 serial port board... tested with putty and hyperterminal on the Dell laptop and tip on the Sun system. Worked fine for this simple connection.
Date published: 2009-06-25
Rated 5 out of
5
by
switch guy from
Worked as advertised
I recently upgraded from Window XP to Windows 7 needed to configure a Cisco switch. My old Belkin adapter didn't work. Drivers were no longer supported. I did a Google search and found CablesToGo. I just installed the software and connected the adapter and everything started working.Very pleased.
Date published: 2011-07-19
Rated 4 out of
5
by
Kandy from
CablesToGo really came through!
We were having a hard time finding connectors for an ancient piece of equipment, but your company had exactly what we needed...thanks so much!
Date published: 2010-03-10
Rated 5 out of
5
by
Setup from
great product!!!
This worked great. Loaded the software, plugged it in couldn't have been easier,
Date published: 2011-06-24
Rated 5 out of
5
by
Sergio from
Great adapter!
Great adapter is just what I needed. Just don't forget to install driver first!
Date published: 2020-06-01
Rated 5 out of
5
by
Jim from
Exactly what I needed
Now my wife can use her sewing machine software with our older computer.
Date published: 2011-01-29
Rated 5 out of
5
by
Behm from
Great Product !
I am using this cable to send/receive CNC programs to/from a Fadal mill.
Date published: 2011-10-07
Rated 5 out of
5
by
Fireman from
To Link HP LaserJet 6P To Dell T7600
Perfect.
Used this to link HP LaserJet 6P to Dell T7600
Date published: 2012-12-28
Rated 5 out of
5
by
Iverson from
It works!! I will buy it again.
I use it to connect instrument with RS232 connection
Date published: 2009-06-11
Rated 5 out of
5
by
Kris from
Perfect
Very good product for very competetive price
Date published: 2009-10-06
Rated 5 out of
5
by
graphics620 from
Exactly what we needed!
Thanks!
Date published: 2011-01-04
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Will this cable work with an HP 7475A Pen Plotter and how is the USB port set up as a printer/plotter port?
We can not answer if specific printers will work. The Chip-set in the device activates the USB PRINTER SUPPORT Driver on the PC.
Date published: 2019-01-07
I have a Kantronics 3 plus and a Dell laptop running Windows11. Will this cable successfully connect the two?
it should. However with the Windows 11 you may have to update the drivers for the Chipset from the Prolific website.
It uses the PL-2303GC chipset
Date published: 2023-12-01
Will I be able to use this cable between a Mac G4 (with USB) and a Roland plotter with a 25 pin serial connection? And of course, is the driver Mac compatible? The G4 has OS 10.3.9
Yes, you can use this adapter cable for that application as it is compatible with Mac.
Date published: 2017-10-06
Is this adapter compatible with Ubuntu?
This device does not have Linux drivers. It will not work on Ubuntu.
Date published: 2017-10-05
misplaced CD installation for this product, can I download it?
You can find the driver download on our website at the following link: http://www.cablestogo.com/docs/drivers/PC_Adapters/22429.zip
Date published: 2017-10-06
Will this work with a HP Design Jet 430 Large-Format Printer? I need a 25 pin male serial interface cable for this printer that will hook up to USB. Bought this at an auction and it didn't come with the cables....I know I can connect with a standard ca...
Will this work with a HP Design Jet 430 Large-Format Printer? I need a 25 pin male serial interface cable for this printer that will hook up to USB. Bought this at an auction and it didn't come with the cables....I know I can connect with a standard cable, but need USB connection, if at all possible.
It appears that HP Design Jet 430 printer requires a null modem cable. So if you have 22429, you would need a DB25 M/F null modem adapter (#02469) or a null modem cable (#03029) to make the proper connection to that printer.
Date published: 2017-10-05
Is this cable adapter compatible with a MacBook Pro?
This cable is compatible with the Mac OS.
Date published: 2017-10-05
Is this a straight through or null modem cable?
This device is meant to be used as a adapter, this is meant to be connected to a cable and then the device. The connection is straight through.
Date published: 2020-05-11
Is this cable compatible with Windows 10?
Yes this is compatible with Windows 10.
Date published: 2017-10-05
Bazaarvoice SAP Hybris Integration Version 2.8.1