Discontinued - TruLink® USB 2.0 Over Cat5 Superbooster™ Wall Plate Kit
#53877
C2G
Bazaarvoice SAP Hybris Integration Version 2.8.1
The Trulink USB 2.0 Superbooster was designed for systems integrators, installers and other end users seeking an innovatively simple yet powerful solution for extending USB signals beyond their native 16.4ft length limitation. Specifically for use in commercial environments, the Trulink USB 2.0 Superbooster is the only USB 2.0 solution on the market that is available in both a dongle and wall plate version. The wall plate and dongle can be interchanged to fit the needs of any installation requiring high performance and maximum flexibility.
Using true USB 2.0 speed and power, this solution provides increased bandwidth and faster data transfer speeds over standard Cat5/6 cabling at lengths up to 328ft. Integrated UTP power inserter technology provides 500 milliamps of power when the power adapter is connected through the transmitter end or receiver end, depending on the desired configuration. This provides enough power to operate most new USB devices and allows for flexibility in equipment placement.
The single gang wall plates provide the clean look of a professional installation. The small form factor of both the dongle and wall plate versions allows for easy installation in tight spaces. The dongle end is uniquely designed to allow it to be securely tethered to other equipment. Installation is quick and easy with no software or driver installation required.
This solution utilizes TruChoice™ power providing the flexibility to power at either the transmitter or receiver end.
Note: The screw terminals used to power the wall plate are non-polarized. Either port may be used for the positive or negative connection to power.
Using true USB 2.0 speed and power, this solution provides increased bandwidth and faster data transfer speeds over standard Cat5/6 cabling at lengths up to 328ft. Integrated UTP power inserter technology provides 500 milliamps of power when the power adapter is connected through the transmitter end or receiver end, depending on the desired configuration. This provides enough power to operate most new USB devices and allows for flexibility in equipment placement.
The single gang wall plates provide the clean look of a professional installation. The small form factor of both the dongle and wall plate versions allows for easy installation in tight spaces. The dongle end is uniquely designed to allow it to be securely tethered to other equipment. Installation is quick and easy with no software or driver installation required.
This solution utilizes TruChoice™ power providing the flexibility to power at either the transmitter or receiver end.
Note: The screw terminals used to power the wall plate are non-polarized. Either port may be used for the positive or negative connection to power.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Specifications
General Info
Product Line | C2G | ||
Color | Black | ||
UPC Number | 757120538776 | ||
Country Of Origin | China |
Resources
Cutsheet
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Is this unit firmware upgradable? We are troubleshooting a connection issue which is likely another component (3rd party USB router) but wanted to firmware service all the components in the chain.
You are not able to update the firmware on the USB 2.0 superboosters.
Date published: 2017-10-06
Do this require the power adapter or can this be bus-powered just like the usb 1.1 version? (part number 29342)I only need it to extend usb to 25 feet and don't like the idea of visible power supplies for conference room installs.
The USB 2.0 Superbooster requires the AC power adapter on the source or receiver. It cannot be powered through the USB bus.
Date published: 2017-10-06
Will this extender work with Epson Brightlink 1460UI projectors?
This will work with any USB 2.0 or 1.1 USB device.
Date published: 2017-10-06
Can this be used without external power - i.e. just to extend the range of data transfer. The descriptive pics of many of the scenarios seem to suggest power is not required for some uses. Can you please explain? thanks
The USB 2.0 Superbooster requires the AC power adapter on the source or receiver in order to function correctly. It cannot be powered through the USB bus.
Date published: 2017-10-06
Bazaarvoice SAP Hybris Integration Version 2.8.1