The TruLink® VGA + Stereo Audio + Serial RS232 over Cat5 Four port transmitter allows VGA video, Stereo Audio and Serial RS232 signals to be extended over Cat5/Cat5e/Cat6 unshielded twisted pair cables up to 300ft or 500ft at a 1920x1200 resolution*. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. The receivers are available in either a wall plate or box form factor and are interoperable with this transmitter allowing this solution to meet the needs of the installation environment In addition, this solution utilizes TruChoice™ power providing the flexibility to power at either the transmitter or receiver end. TruPair™ technology allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display’s capabilities, to be communicated, ensuring that the content from the source is sent at the optimal resolution for the display. Built-in power surge protection and high ground loop immunity ensure high performance signal extension. The DB9 Serial RS232 port supports full-duplex data communication at 230Kbps and is fully compatible with all RS232 protocols. Point-to-point or multi-drop data communication is supported.
*Longer distances can be achieved at lower resolutions.
Note: Stranded Cat5e/6 cables may be used for extension applications up to 250ft. Shielded, solid conductor Cat5e/6 cabling is recommended for applications where the Cat5e/6 cable must be coiled, is run near other high-frequency signaling cables or in high EMI/RFI environments. For best performance use a Cat6 Solid Shielded Patch Cable
• Download the manual from the Support tab • Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab
• Download a PDF with the technical specifications of this product on the Support tab
• Video Signal Support - VGA • Audio Signal Support - Stereo Audio • Control Signal Support - Serial RS232 • Maximum Video Resolution - 1920x1080 or 1920x1200 • Maximum Cable Distance - 300ft • Recommended Category Cable - Solid Cat5e or Cat6
• Video Port - HD15 Female • Audio Port - 3.5mm Female • Control Port - DB9 Female • Data Ports - RJ45 Female x 2
• Source device with a standard VGA video, stereo audio, and serial RS232 outputs • One transmitter, box or wall plate• Two standard UTP cables* of identical length • At least one receiver, box or wall plate • Display device with a standard VGA, stereo audio, and RS232 inputs *CAT6 is recommended for this product. Cat5e can be used without significant impact to image quality. STP cabling is recommended for environments with high EMI or RFI.