• Your Cart Is Empty
Shop our products to find what you need.

HDMI® HDBaseT over Cat5 Extender Single Gang Wall Plate Transmitter - Aluminum (TAA Compliant)


Product Features

Extend HDMI video and audio signals up to 300ft at a 1080p video resolution using HDBaseT technology
• Extend HDMI up to 300ft at a 1080p resolution
• Utilizes a single category cable for extension
• HDBaseT technology supports EDID pass through
• TruChoice Power allows for power at transmitter or receiver end
(1) HDMI Female
(1) RJ-45 Female

Product Description

The HDMI over Cat5 allows HDMI audio/video signals to be extended over a single Cat5/Cat5e/Cat6 unshielded twisted pair cable up to 300ft at a 1080p resolution. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. The transmitter and receiver are available in either a wall plate or box form factor and are interoperable allowing this solution to meet the needs of the installation environment. In addition, this solution utilizes TruChoice™ power, which allows power to be supplied over the Cat5 cable to both the transmitter and receiver from a single power adapter placed at either the transmitter or the receiver end of the solution. HDBaseT technology supports HDCP and allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display‚Äôs capabilities, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display. Built-in power surge protection and high ground loop immunity ensure high performance signal extension.

View compatible receivers, additional transmitters and kit options on the HDMI over Cat5 Product Family Sheet

Note: Stranded Cat5e/6 cables may be used for HDMI extension applications up to 250ft. Shielded, solid conductor Cat5e/6 cabling is recommended for applications where the Cat5e/6 cable must be coiled, is run near other high-frequency signaling cables or in high EMI/RFI environments. For best performance use a Cat6 Solid Shielded Patch Cable

• Download the manual from the Support tab
• Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

Product Certifications

Tap an icon to learn more:
RoHS Compliant

Product Specifications

Color : Aluminum
UPC : 757120292234
Warranty : 3 Years
Vendor : C2G
Weight : 1.640 LB
• Download a PDF with the technical specifications of this product on the Support tab
Signal Specifications

• Video Signal Support - HDMI
• HDMI Features Supported - HDCP, 3D, Deep color, Dolby + DTS 7.1 Audio, Consumer Electronics Control (CEC)
• Maximum Video Resolution - 1080p
• Maximum Cable Distance - 300ft*
• Recommended Category Cable - Solid Cat5e or Cat6*

*Solid conductor Cat5 or Cat6 cabling is recommended for use with the digital products, HDMI and HDMI with RS232. Coiling of excess cable lengths should be avoided for best performance results. Shielded, solid conductor Cat5 or Cat6 cabling is recommended if a cable must be coiled or is run near other high-frequency signaling cables.
Power Adapter Specifications

• Input Voltage - 100-240V
• Output Voltage/Amperage - 18V, 1.0A
• Cable Length - 1.5m
• Plug Diameter - 4.75mm
• Center Pin Polarity - Positive
Physical Characteristics

• Video Input/Output Port - HDMI Female
• Data Input/Output Ports - RJ45 Female

Product Uses

•Conference rooms
•Corporate environments
•Houses of worship
•Digital signage

Package Contents

• Transmitter unit
• Aluminum wall plate
• Package of screws (6 screws)
• 2 washers
• Terminal block to DC jack adapter
• Power adapter
• User manual

Product Support


• Download the manual
• Download the technical specifications
Customer Reviews

For immediate help, please with us!

Rated 5 out of 5 by from HDMI to 286 feet over Cat 6 The Electrician installed the Transmitter & Receiver using Cat 6 cable as he likes using Cat 6 cable. The cable went under ground in a conduit from the HDMI player through C2G Transmitter, to the C2G Receiver, then from the receiver HDMI, to the HDMI input on a 65 inch HDMI TV. The system was turned on and the quality was as if the player was connected directly with a 3 ft HDMI cable to the TV. The setup was truly plug & play. I was reluctant to purchase the C2G kit as I was afraid it would not work. Now I will buy more units as I have friends with similar needs. I am impressed how well it works and how small the C2G unit is. If you have a similar problem, this is the answer.
Date published: 2018-02-22
  • y_2018, m_11, d_21, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_29223, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cablestogo
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 87ms
Questions & Answers

For immediate answers, please with us for help!

Is the power supply required for this product? I need an HDMI over CAT5 solution that will mount inside a single-gang box but does not require a power supply. Do you have something like this available? Thanks.

Asked by: Nate
This product requires a power supply at the transmitter or receiver end. We do not carry a product that will not need to be powered to send HDMI over Cat5.
Answered by: Steve
Date published: 2017-10-06

How deep is the transmitter? (Not including wall plate)

Asked by: Anonymous
The transmitter is 44.6mm (1.76 inches) deep from the front of the wall plate to the rear of the wall plate.
Answered by: Michael
Date published: 2017-10-05

Which receivers do you use with the HDBaseT over Cat5 Four Port Box Transmitter?

Asked by: jickey
The Part number of the receiver is 29269.
Answered by: Tom
Date published: 2017-10-05

Do you need to run 1 cat5/6 as well as a 16/2 for power?

Asked by: Anonymous
You would need the 1 Cat5e/6 cable. If you are powering the transmitter, you would need a separate 16/2 for power. The other option would be powering the receiver side. If the receiver is a box unit, you would not need to run a 16/2 cable because you could just plug in the power adapter into the box.
Answered by: Steve
Date published: 2017-10-05

Do your products comply with RoHS and REACH?

Asked by: Andy
Yes, this product does comply with RoHS and REACH.
Answered by: Steve
Date published: 2017-10-06

In the description it says that there is a wall plate version of this as a receiver. What is the model number for that?

Asked by: Tommy
Unfortunately that product is not available at this time.
Answered by: Tom
Date published: 2017-10-05
  • y_2018, m_11, d_21, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_29223, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_cablestogo
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 256ms
More Choices