Discontinued - Infrared Remote (IR) Control Repeater Kit- 4 Emitters
#40696
C2G
Infrared Remote (IR) Control Repeater Kit- 4 Emitters is rated
out of
5 by
1.
Bazaarvoice SAP Hybris Integration Version 2.8.1
Does your entertainment system have glass or wooden doors, or are A/V components in a closet or cabinet? Without a clear line of sight, infrared (IR) signals from a remote control will not reach the equipment and it cannot be controlled. Our remote control repeater kit is the perfect solution for these situations and contains all equipment necessary to remotely operate four components using standard remotes. Mount the IR receiver in a central, visible location and connect to the IR distribution block. This block repeats the signals through emitters to the A/V components which may now be controlled while mounted in an entertainment center, closet or another room! The kit is self-contained and easy to connect.
With this kit, the receiver may be mounted in a convenient place on or near the entertainment system. The receiver has a 5 meter (16.4ft) cable that is then attached to the IR distribution block of the repeater system which may be mounted in an entertainment cabinet. The connection from the IR distribution block to up to four devices is made with the 42 inch emitter cable which connects to the IR distribution block with a 3.5mm connection then adheres to the IR receiver eye of the device.
Note: This repeater kit is not designed to be extended with a 3.5mm cable.
With this kit, the receiver may be mounted in a convenient place on or near the entertainment system. The receiver has a 5 meter (16.4ft) cable that is then attached to the IR distribution block of the repeater system which may be mounted in an entertainment cabinet. The connection from the IR distribution block to up to four devices is made with the 42 inch emitter cable which connects to the IR distribution block with a 3.5mm connection then adheres to the IR receiver eye of the device.
Note: This repeater kit is not designed to be extended with a 3.5mm cable.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Specifications
General Info
Product Line | C2G | ||
Color | Black | ||
UPC Number | 757120406969 | ||
Country Of Origin | China | ||
Features | IR (Infrared) | ||
Application Sector | Commercial, Residential | ||
Warranty Type | Lifetime | ||
Type | Kit, Transmitter |
Resources
Cutsheet
Reviews
Rated 2 out of
5
by
Manu from
Incompatible w/ Sci Atlanta Cable box
Works with most of my components, but does not work with the Scientific Atlanta Explorer 4240HDC cable box.
Date published: 2012-12-05
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
What is the maximum distance between the TV and other devices that this kit can be used?
The maximum distance is about 22ft. The IR receiver is 16ft and the longest emitter cable is 6ft.
Date published: 2017-10-06
Will this work with a TASCAM CD-355 with 20Hz - 20kHz Frequency Response?
The 40696 Repeater Kit has a receiver range of 30KHz to 60 KHz. It appears that it would not work with your equipment.
Date published: 2017-10-05
My sound Bar the sound bar (Polk Magnifi) blocks the IR receiver on the TV (Sony Bravia). Will this produce control the TV> V??
You could use this IR extender for that application.
Date published: 2017-10-05
hello can i use it with 220volt ? tnx
Yes. It can be used with 220V. The input range is 100 ~ 240V.
Date published: 2017-10-05
Will this system work with an AT&T U-Verse receiver? Also, will it work with a Yamaha stereo receiver?
It will work with AT&T U-Verse. It should also work with the Yamaha receiver.
Date published: 2017-10-05
Bazaarvoice SAP Hybris Integration Version 2.8.1