TruLink® USB 2.0 Over Cat5 Superbooster Dongle Transmitter to Wall Plate Receiver Kit

Tap Click image to expand

Loading...

TruLink® USB 2.0 Over Cat5 Superbooster Dongle Transmitter to Wall Plate Receiver Kit

Dongle to wall plate kit extends USB 2.0 signals and power up to 328 feet over Cat5

53879

195 In Stock & ready to ship!

$359.99 msrp

qty.

Product Features

• Extends USB 2.0 signals up to 328 feet
• Uses a single standard network patch cable
• Supplies 500 milliamps of power at the receiver
• Powered with a single power supply at the transmitter or receiver

(1) USB-B Female, (1) RJ-45 Female

(1) RJ-45 Female, (1) USB-A Female


Product Description

The Trulink USB 2.0 Superbooster was designed for systems integrators, installers and other end users seeking an innovatively simple yet powerful solution for extending USB signals beyond their native 16.4ft length limitation. Specifically for use in commercial environments, the Trulink USB 2.0 Superbooster is the only USB 2.0 solution on the market that is available in both a dongle and wall plate version. The wall plate and dongle can be interchanged to fit the needs of any installation requiring high performance and maximum flexibility.

Using true USB 2.0 speed and power, this solution provides increased bandwidth and faster data transfer speeds over standard Cat5/6 cabling at lengths up to 328ft. Integrated UTP power inserter technology provides 500 milliamps of power when the power adapter is connected through the transmitter end or receiver end, depending on the desired configuration. This provides enough power to operate most new USB devices and allows for flexibility in equipment placement.

The single gang decora style wall plates provide the clean look of a professional installation. The small form factor of both the dongle and wall plate versions allows for easy installation in tight spaces. The dongle end is uniquely designed to allow it to be securely tethered to other equipment. Installation is quick and easy with no software or driver installation required.

This solution utilizes TruChoice™ power providing the flexibility to power at either the transmitter or receiver end.

Note: The screw terminals used to power the wall plate are non-polarized. Either port may be used for the positive or negative connection to power.

Note: If the USB signal is being extended to support a 300 series or 500 series Promethean interactive whiteboard, then we recommend using our product 29338. For more information about this recommendation, read our application bulletin.

•Download the manual from the Support tab
•Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab


Product Specifications

Color : Black
UPC : 757120538790
Warranty : 1 Year
Weight : 1.964 LB

•Download a PDF with the technical specifications of this product on the Support tab
• Integrated UTP power inserter technology
• Interchangeable design with swappable components – wall plates and dongles
• Extends USB from 16.4ft up to 328ft over Cat5/6 (UTP/STP, solid/stranded)
Call to order replacement power supply #98116

General Specifications

• USB Specification - USB 2.0
• USB Data Bandwidth - Up to 480Mbps
• Maximum Cable Distance - 100m (328ft)
Power Specifications

• Power Adapter Input - 100 - 240V~50/60Hz
• Power Adapter Output - 24.0VDC, 1000mA
• Power Adapter Pin Diameter - 5.5mm
• Power Adapter Center Pin Polarity - Positive
• Power Adapter Cable Length - 12ft
• USB Power Output - 5V, 500mA
Physical Characteristics

• Transmitter Connectors - (1) USB B Female, (1) DC Power Female*, (1) RJ45 Female
• Receiver Connectors - (1) USB A Female, (1) DC Power Female*, (1) RJ45 Female
• Wall Plate Insert Dimensions - 66.5 x 30.0mm
• Wall Plate Dimensions - 103.6 x 40 x 44mm
• Dongle Dimensions - 86 x 57 x 30mm
*The female DC power port on the wall plate transmitter and receiver is a screw terminal designed to accept bare wire.


Product Uses


Diagram above shows use of the Superbooster in a classroom


Diagram above shows use of the Superbooster in a healthcare application


Diagram above shows use of the Superbooster in a security application

• Use in a classroom to extend and power interactive whiteboards
• Place a printer in a more convenient location, while the computer is in a secure location
• Add USB cameras or fingerprint readers to remote facilities for added security and monitoring
• Use in healthcare facilities for USB-based digital x-ray applications
• Upgrade existing superbooster infrastructure from USB 1.1 to USB 2.0 for greater performance


Package Contents

• (1) Dongle Transmitter
• (1) Wall Plate Receiver
• (1) Power Supply
• (1) Quick Start Guide
• (1) Phoenix Power Connection
• (1) 1ft USB A/B Cable
• (2) 14 inch Cable Ties


Product Support

Downloads

•Download the
•Download the technical specifications

If you need an immediate answer, please live chat with one of our connectivity experts!

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

3 Questions | 4 Answers
Displaying questions 1-3
  • TruLink® USB 2.0 Over Cat5 Superbooster Dongle Transmitter to Wall Plate Receiver Kit

    Q:

    Does the wall plate receiver have an integral USB hub? I see that it only has a single port for connection. My application requires a point-to-point connection without an integral hub.
    Asked on 3/12/2014 by Anonymous

    1 answer

    • CUSTOMER CARE

      A:

      Product 53879 will be recognized as a hub.

      Answered on 3/13/2014 by Sean from C2G
  • TruLink® USB 2.0 Over Cat5 Superbooster Dongle Transmitter to Wall Plate Receiver Kit

    Q:

    Will this device work with Isochronous USB video data streams?
    Asked on 11/4/2013 by Alec from Cincinnati, OH

    1 answer

    • CUSTOMER CARE

      A:

      Yes, this USB 2.0 extender supports isochronous USB data transfer.

      Answered on 11/5/2013 by Steve from C2G
  • TruLink® USB 2.0 Over Cat5 Superbooster Dongle Transmitter to Wall Plate Receiver Kit

    Q:

    When and where do the modules need to be connected to DC power? Some of the example diagrams you have show DC power, but not all. I was not able to locate an installation manual.
    Asked on 5/17/2013 by Dave from Alexandria, VA

    2 answers

    • CUSTOMER CARE

      A:

      You would need to connect external power to the wall plate via the Phoenix connector and DC power to the receiver. This kit would need to be powered at all times.

      Answered on 5/20/2013 by Michael from C2G
    • CUSTOMER CARE

      A:

      You would need to connect external power to the wall plate via the Phoenix connector and DC power to the receiver. This kit would need to be powered at all times.

      Answered on 5/20/2013 by Michael from C2G
Displaying questions 1-3

Do you have a question about this product? 

You may also like…