Create custom length Cat6 network patch cables with this flexible, in-wall rated cabling
• 24AWG, stranded, bare copper conductors • In-wall, CM-Rated, jacket • No-snag box makes for easy pulling • Foot marked to easily identify remaining cable
This in-wall rated Cat6 cable is perfect for creating custom length network patch cables. The stranded conductor construction makes this cable flexible and easy to work with, while the design of this box allow it to be easily dispensed. This cable is built to ANSI/TIA-568-C.2 standards and tested at frequencies up to 400MHz making it the ideal product for high performance transmissions. The jacket is foot marked allowing for easy determination of the amount of cable remaining.
Tap an icon to learn more:
Jacket Rating :
• Voltage rating: 300V • Spark test: 2.5KV DC • AC leakage (current through jacket): < 10mA (1.5KV AC) • Conductor DC resistance: < 14Ω/100m • Resistance unbalance: < 5% • Dielectric strength: 1.5KV AC for 2s • Insulation resistance: > 5000MΩ/KM • Mutual capacitance: < 5.6nF/100m • Capacitance unbalance (pair-to-ground): < 160 pF/100m
Conductors • Material: 24AWG (7/33) stranded, bare copper • Insulation: Polyolefin (PO) • Outside diameter: 1.00 ± 0.03mm Overall cable • Jacket material: Flame retardant polyvinyl chloride (FRPVC) • Jacket thickness: 0.50 ± 0.05mm • Outside diameter: 5.4 ± 0.2mm • Storage temperature range: -20° to 75°C • Installation temperature range: 0° to 60°C • Operating temperature range: -20° to 60°C • Minimum bend radius: 21.6mm • Maximum pulling tension: 110N
Ideal for IEEE802.3ab 1000Base-T, 1000BaseTX, and legacy speeds, CDDI/ATM/Token Ring, IEEE 802.3af (PoE)/IEEE 802.3at (PoE+), voice and multimedia.