9/125 micron cable for gigabit ethernet applications
(1) LC Male
(1) ST Male
Cost-effective solution that provides high bandwidth and transmission rates over longer distances. With LC to ST termination, this high quality fiber optic patch cable is specifically designed for gigabit ethernet applications. The patented injection molding process provides each connection greater durability in resisting pulls, strains and impacts from cabling installs.
Each cable is 100% optically inspected and tested for insertion loss before you receive it. A pull-proof jacket design surrounds the popular 9/125 Single-mode fiber, immune to electrical interference.
Tap an icon to learn more:
• LC Connector Dimensions: 4.5mm Height x 4.5mm Width x 50mm Depth • ST Connector Dimensions: 9.6mm Diameter x 56mm Depth • Maximum Connector Loss: 0.50 dB • Typical Connector Loss: 0.30 dB • Typical Return Loss: -55 dB • Buffer Material: PVC • Buffer OD: 900 µm • Jacket Material: PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1,000 cycles • Flex Resistance: 5,000 cycles • Attenuation at 1550 nm: 0.25 dB/km • Attenuation at 1310 nm: 0.35 dB/km • Operating Temperature: -20°C to +70°C Please Note: Attenuation testing performed in accordance with EIA/TIA-455-171A.
The description for this part is erroneous. It says it has 2 st connectors (and the picture shows it as well), but when I received the part after waiting the 21 days, it only has a single ST connector, and it is a single cable.
The correct part number is 37481
Bottom Line No, I would not recommend this to a friend
Merchant response: This has been corrected and we apologize for the error.