• YOUR CART IS EMPTY
Shop our products to find what you need.
Shadow

TruLink® VGA + Stereo Audio + Serial RS232 over Cat5 Extender Aluminum Wall Plate Transmitter to Aluminum Wall Plate Receiver Kit

#29394

Product Features

Extend VGA video, Stereo Audio and Serial RS232 control signals up to 300ft at a 1920x1200 video resolution
• Extend VGA, Stereo Audio and Serial RS232 up to 300ft at a 1920x1200 resolution
• Utilizes two category cables for extension
• TruPair technology ensures compatibility with any monitor
• TruChoice Power allows for power at transmitter or receiver end
• Kit includes both the transmitter and receiver units

(1) VGA Female, (1) 3.5mm Stereo Female, (1) DB9 Female, (2) RJ-45 Female

(2) RJ-45 Female, (1) VGA Female, (1) 3.5mm Stereo Female, (1) DB9 Female

Product Description

The TruLink® VGA + Stereo Audio + Serial RS232 over Cat5 kit is a complete solution for extending VGA video, Stereo Audio and Serial RS232 signals over two Cat5/Cat5e/Cat6 unshielded twisted pair cables up to 300ft at a 1920x1200 resolution*. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. This solution utilizes TruChoice™ power providing the flexibility to power at either the transmitter or receiver end. TruPair™ technology allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display‚Äôs capabilities, to be communicated, ensuring that the content from the source is sent at the optimal resolution for the display. Built-in power surge protection and high ground loop immunity ensure high performance signal extension. The DB9 Serial RS232 port supports full-duplex data communication at 230Kbps and is fully compatible with all RS232 protocols. Point-to-point or multi-drop data communication is supported.

*Longer distances can be achieved at lower resolutions.

Note: Stranded Cat5e/6 cables may be used for extension applications up to 250ft. Shielded, solid conductor Cat5e/6 cabling is recommended for applications where the Cat5e/6 cable must be coiled, is run near other high-frequency signaling cables or in high EMI/RFI environments. For best performance use a Cat6 Solid Shielded Patch Cable

• Download the manual from the Support tab
• Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab
Tap an icon to learn more:
RoHS
TAA Compliant

Product Specifications

Color : Stainless Steel
UPC : 757120293941
Warranty : 3 Years
Vendor : C2G
Weight : 3.130 LB
• Download a PDF with the technical specifications of this product on the Support tab
Signal Specifications

• Video Signal Support - VGA
• Audio Signal Support - Stereo Audio
• Control Signal Support - Serial RS232
• Maximum Video Resolution - 1920x1080 or 1920x1200
• Maximum Cable Distance - 300ft
• Recommended Category Cable - Solid Cat5e or Cat6
Power Adapter Specifications

• Input Voltage - 100-240V
• Output Voltage/Amperage - 18V, 1.0A
• Cable Length - 1.5m
• Plug Diameter - 4.75mm
• Center Pin Polarity - Positive
Physical Characteristics

• Video Port - HD15 Female
• Audio Port - 3.5mm Female
• Control Port - DB9 Male
• Data Ports - RJ45 Female x 2

System Requirements

• Source device with a standard VGA video, stereo audio, and serial RS232 outputs
• One transmitter, box or wall plate
• Two standard UTP cables* of identical length
• One receiver, box or wall plate
• Display device with a standard VGA, stereo audio, and RS232 inputs
*CAT6 is recommended for this product. Cat5e can be used without significant impact to image quality. STP cabling is recommended for environments with high EMI or RFI.

Product Uses

•Classrooms
•Conference rooms
•Corporate environments
•Houses of worship
•Healthcare
•Digital signage

Package Contents

• Transmitter unit
• Receiver unit
• 2 Aluminum wall plate
• 2 Package of screws (6 screws)
• 4 washers
• Terminal block to DC jack adapter
• Power adapter
• User manual

Product Support

Downloads

• Download the manual
• Download the technical specifications
• Download the A/V Over Cat5 Product Family Sheet
Customer Reviews
Powered by PowerReviews
Questions & Answers About This Product

For immediate answers, please with us for help!

Do you have questions about this product?

Get answers from real customers and in-house experts with AnswerBox.

1 Question | 1 Answer
Displaying question 1
  • 300ft VGA+3.5mm Audio+RS232 over Cat5 Wall Plate Transmitter/Box Receiver

    Q:

    Hi,

    I am planning to purchase this product for use in a mounted projector project. However, I am curious about the wall plate. Does it need to be connected to 110 AC? Or does the transmitter take care of that?

    Thank you,

    Jon E.
    Asked on 4/17/2013 by IT Guy

    1 answer

    • CUSTOMER CARE

      A:

      This will need ot be connected to 110 AC as it needs the additional power to send the signals.

      Answered on 4/18/2013 by Michael from C2G
Displaying question 1

Do you have a question about this product? 

Powered by PowerReviews