1-Port USB 1.1 Over Cat5 Superbooster Extender Dongle Receiver
Dongle recevier extends USB 1.1 signals over Cat5 up to 150 feet over Cat5 when paired with a transmitter
We Offer Same Day Shipping
Order by 4pm ET on weekdays, choose UPS Ground Shipping, and we'll ship that same day! For weekend/holiday orders, or weekdays orders after 4PM with UPS Ground Shipping, we'll ship your order the next business day. For More information, see our Shipping Tips.
One component of a complete solution that, when paired with a transmitter (sold separately), conquers USB length limits. This solution extends the signal of a USB device to a host computer up to 150 feet, enabling you to place your USB projector, camera, printer, web cam, hub or other USB device exactly where you want it! Our USB superbooster wall plate is powerful yet simple, with no drivers to install or special software required. It's also compatible with any computer that supports USB.
The overall plug-and-play solution consists of this wall plate receiver, and your choice of a compatible transmitter that is sold separately: the Decora®-compatible wall plate (#29344), the dongle (#29348) or the keystone insert (#29349). Customize the configuration to your specific needs! This versatility is ideal for applications where you need flexibility at your computer/source side.
The complete solution is connected via a standard Cat5, Cat5E, or Cat6 UTP cable (not included) that provides easy in-wall installation. This delivers a clean, finished look important for homes, classrooms, offices and anywhere you don't want visible cables lying around. Use pre-terminated network cables, or pull unterminated cable and use the included toolless IDC RJ45 connector to terminate your own cable. Because the USB superbooster wall plate is bus-powered, no external power source is required. Compatible with Leviton Decora® brand cover plates, this single gang wall plate fits a standard J-box. Compliant with USB specification 1.1.
Input: One USB Type A Female
Output: One RJ45 Female
Please Note: The power demands of devices such as external drives and USB hubs may require the use of external power for proper operation.
Note: If the USB signal is being extended to support an interactive whiteboard, then we recommend using our product 29338. For more information about this recommendation, read our application bulletin.
Decora® is a registered trademark of Leviton Manufacturing Company, Inc. This product is not manufactured or endorsed by the Leviton Manufacturing Company, Inc.
•Download the manual from the Support tab
•Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab
Connector 1: (1) USB-A Female
Connector 2: (1) RJ-45 Female
|Vendor:||Cables To Go|
• USB specification - USB 1.1
• USB transfer rates supported - Full Speed - 12Mbps, Low Speed - 1.5Mbps
Category Cable Requirements
• Category cables supported - Cat5, Cat5E, Cat6
• Cable pinouts supported - T568B - Recommended, T568A
• USB connector - USB A Female
• Data connector - RJ45 Female
• Dimensions - 2.50 x 0.65 x 0.98in
• Cable length - 6.00in
Additional Specifications• One superbooster transmitter: wall plate (#29344), dongle (#29348) or keystone insert (#29349) each sold separately
• One superbooster receiver (this item)
• One Cat5/5E/6 UTP patch cable
• USB-enabled computer
Reviewed by 1 customer
Displaying review 1
Comments about 1-Port USB 1.1 Superbooster Dongle - Receiver:
We used this device to move a none network ready wide format printer out of the office and into a designated printer/copy room.
- Primary use:
- Was this a gift?:
Q & A
• One 1-port USB superbooster dongle receiver