USB 1.1 Over Cat5 Superbooster Extender Dongle Transmitter
Dongle transmitter extends USB 1.1 signals over Cat5 up to 150 feet over Cat5 when paired with a receiver
We Offer Same Day Shipping
Order by 4pm ET on weekdays, choose UPS Ground Shipping, and we'll ship that same day! For weekend/holiday orders, or weekdays orders after 4PM with UPS Ground Shipping, we'll ship your order the next business day. For More information, see our Shipping Tips.
One component of a complete solution that, when paired with a receiver (sold separately), conquers USB length limits. This solution extends the signal of a USB device to a host computer up to 150 feet, enabling you to place your USB projector, camera, printer, web cam, hub or other USB device exactly where you want it! Our USB superbooster dongle is powerful yet simple, with no drivers to install or special software required. It's also compatible with any computer that supports USB.
The overall plug-and-play solution consists of this dongle transmitter, and your choice of a compatible receiver that is sold separately: the 1-port dongle (#29350 or #29353), the 2-port Decora®-compatible wall plate (#29345), the 2-port dongle (#29346) or the 4-port dongle (#29347). Customize the configuration to your specific needs! This versatility is ideal for applications where you need more than one receiving USB device, or when you need a receiving dongle instead of a receiving wall plate.
The complete solution is connected via a standard Cat5, Cat5E, or Cat6 UTP cable (not included) that provides easy installation. Use pre-terminated network cables, or pull unterminated cable and use the included toolless IDC RJ45 connector to terminate your own cable. Because the USB superbooster dongle is bus-powered, no external power source is required. Compliant with USB specification 1.1.
Input: One USB Type A Male
Output: One RJ45 Female
Please Note: The power demands of devices such as external drives and USB hubs may require the use of external power for proper operation.
Note: If the USB signal is being extended to support an interactive whiteboard, then we recommend using our product 29338. For more information about this recommendation, read our application bulletin.
Decora® is a registered trademark of Leviton Manufacturing Company, Inc. This product is not manufactured or endorsed by the Leviton Manufacturing Company, Inc.
•Download the manual from the Support tab
•Download a PDF with the technical specifications of this product on the Support tab or view the technical specifications of this product on the Specs tab
Input: (1) USB-A Male
Output: (1) RJ-45 Female
|Vendor:||Cables To Go|
Additional Specifications• One superbooster receiver: 1-port dongle (#29350 or #29353), 2-port dongle (#29346), 4-port dongle (#29347) or 2-port wall plate (#29345) each sold separately
• USB specification - USB 1.1
• USB transfer rates supported - Full Speed - 12Mbps, Low Speed - 1.5Mbps
Category Cable Requirements
• Category cables supported - Cat5, Cat5E, Cat6
• Cable pinouts supported - T568B - Recommended, T568A
• USB connector - USB A Male
• Data connector - RJ45 Female
• Dimensions - 2.14 x 1.00 x 1.49in
• Cable length - 6.00in
Reviewed by 1 customer
Displaying review 1
- Comfortable Strap
- Good Protection
- Lots Of Pockets And Features
- Worked perfectly
- Got to move my printers
- Heavy Duty Protection
Comments about USB 1.1 Over Cat5 Superbooster Extender Dongle Transmitter:
I purchased a 2-outlet dongle at the same time, and was able to move my printers to a more secure location, which met my expectation to a "T"
- Primary use:
- Was this a gift?:
Q & A
Diagram above shows how one input such as the PC can connect to the dongle transmitter which distributes the signal to the receiver that then can connect to an output such as the USB Hub.
• One USB superbooster dongle transmitter
• One RJ45 toolless IDC connector
• User Guide
You may also like...