Discontinued - 48-Port Cat5E 110-Type Patch Panel
#03854
C2G
48-Port Cat5E 110-Type Patch Panel is rated
out of
5 by
5.
Bazaarvoice SAP Hybris Integration Version 2.8.1
This patch panel is made for optimum performance with black electrostatic powder-coated steel and 50 micron gold-plated contacts. Every panel comes with 110-type termination, while meeting and exceeding EIA/TIA TSB-40 Cat5E connecting hardware specifications. The clear numbering on both the front and back of each panel provides a quick, easy way to identify cable runs.
The high density 19-inch panel design lets you mount to any standard 19-inch rack or cabinet, accommodates top, bottom or side cable entry, and also saves valuable space in your rack. It also has a write-on designation label with a clear holder on the front and the rear.
The high density 19-inch panel design lets you mount to any standard 19-inch rack or cabinet, accommodates top, bottom or side cable entry, and also saves valuable space in your rack. It also has a write-on designation label with a clear holder on the front and the rear.
Connector 1:
(1) RJ-45 Female
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Specifications
General Info
| Product Line | C2G | ||
| Color | Black | ||
| UPC Number | 757120038542 | ||
| Country Of Origin | China | ||
| Type | Patch Panel |
Technical Information
| Number of Ports | 48 |
Resources
Cutsheet
Reviews
Rated 5 out of
5
by
jerryhardesty from
48 Position Cat5 PP with 110 punchdown
I Use the Panel for my Home network. I have seven computers terminated into it and A wireless access point,
a switch, router and hub each 5 ports. I easily patch out of the Server and into the router whenever I want to and it takes only seconds to do so. Trouble shooting is a snap with Patch Panels, install them even at home, when you have a network as big as this they really require a Patch panel system like this one.
Date published: 2010-06-11
Rated 4 out of
5
by
Bugsy from
Product I would buy again
We bought this for an expansion project in our office to add hard wired network to another part of the building.
Date published: 2009-07-21
Rated 4 out of
5
by
Elliott from
Good product
Bought 3 of these for an office building we wired. Worked fine, and didn't have any issues with connectivity.
Date published: 2010-06-07
Rated 5 out of
5
by
Jay from
Great Patch Panel
Does the job problem free. Seems well built
Date published: 2010-06-10
Rated 5 out of
5
by
David M from
I Would buy this product again
I am very please this product and would highly recommend it.
Date published: 2010-06-11
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
does the cat5 wires require a male connector for this panel?
This Patch Panel does require that male RJ45 connectors be used in the front while the conductors are punched down on the rear of the Patch Panel.
Date published: 2017-10-05
can you use cat 6 wire with this unit
Yes, you can use Cat6 wire with this patch panel.
Date published: 2017-10-05
Is this UL listed? UL listing is required in Florida by code
This patch panel is not UL listed.
Date published: 2017-10-06
Bazaarvoice SAP Hybris Integration Version 2.8.1