Buy the 18in 7-pin 180° to 90° 1-Device Side Serial ATA Cable on http://www.cablestogo.com Print This PagePrint This Page
18in 7-pin 180° to 90° 1-Device Side Serial ATA Cable image
 
(based on 4 ratings)
Read All Reviews
Brand: Cables To Go
Located in: Cables
When connecting serial ATA devices to your motherboard or host controller, you want a permanent solution. The last thing you need is a cable that could fatigue, or even fail over time, because of bending or stress occurring right at the critical connection. Our angled connectors deliver the cable at a more desired angle and are fortified to keep the cable lined up straight. So you'll see less cable bend and fatigue for longer cable life. SATA 3.0 compatible with transfer rates up to 6 Gbps! This serial ATA cable is especially designed to handle the differential signals implemented in today's technology, while delivering increased throughput and reduced data packet loss. With our 7-pin, 1-device cable, you'll receive higher data transmission rates, reduced crosstalk, and improved signal integrity. Plus, this cable reduces overheating and saves internal space within the CPU unit for easy movement when adding or removing hard drives, PCI cards or other adapters. Our serial ATA cable can minimize clutter, increase airflow and maximize your potential transfer rate. Connector 1: 7-pin Serial ATA Female Connector 2: 7-pin Serial ATA Female
More information for the 18in 7-pin 180° to 90° 1-Device Side Serial ATA Cable
Review Snapshot®
Avg. Customer Rating:
 
3.8 stars
(based on 4 reviews)

Customers most agreed on the following attributes:

Describe Yourself:
Enthusiast(3)
Primary use:
Personal(3)
 
Check your motherboard connection
By MattVerified Reviewer from USA on 1/26/2010
Describe Yourself:
Enthusiast
Primary use:
Personal

Comments about Cables To Go 18in 7-pin 180° to 90° 1-Device Side Serial ATA Cable:

Check your motherboard and verfiy that the "key" is in the correct position. I would have liked to use these cables as they look slick, but my motherboard is configured as such that they would point down instead of up. Too bad. I did not purchase, and can't until they offer right angle with either "key". Otherwise seems to be a nice product.

 
Works as advertised
By STOVerified Purchaser from Quincy, MA on 12/31/2009
Pros:
Good Length, Rugged
Describe Yourself:
Enthusiast
Primary use:
Personal
Bottom Line:
Yes, I would recommend this to a friend

Comments about Cables To Go 18in 7-pin 180° to 90° 1-Device Side Serial ATA Cable:

Works as advertised

 
GOOD PRODUCT, WOULD BUY AGAIN!!
By DAVIDVerified Purchaser from LARGO, FL on 10/13/2009
Pros:
Consistent Performance, Good Length
Best Uses:
High-End Equipment
Describe Yourself:
Power User
Primary use:
Business
Bottom Line:
Yes, I would recommend this to a friend

Comments about Cables To Go 18in 7-pin 180° to 90° 1-Device Side Serial ATA Cable:

A MUST FOR SATA DRIVES NATURALLY, SATISFY ALL MY NEEDS-ESPECIALLY PRICE!!

[4 of 4 customers found this review helpful]

 
Side Connector not for hard drive
By JohnVerified Reviewer from Albany, NY on 6/10/2009
Cons:
Incompatible
Describe Yourself:
Enthusiast
Primary use:
Personal

Comments about Cables To Go 18in 7-pin 180° to 90° 1-Device Side Serial ATA Cable:

I purchased 2 of these cables to improve airflow in the hard drive cage of my case. Unfortunately, the connector, if plugged into the back of a hard drive, points to the left and blocks the power connector. So the side connector is only useful if plugged into a motherboard. The picture from Cables-to-Go does not show this. You can't see the socket pattern on the side-pointing connector.

Customer Reviews about the 18in 7-pin 180° to 90° 1-Device Side Serial ATA Cable at Cables To Go
Powered by PowerReviews
Copyright © 2011 Cables To Go All Rights Reserved. Do not republish contents.