Buy the 6.3mm (1/4in) Stereo Male to RCA Female Adapter on http://www.cablestogo.com Print This PagePrint This Page
6.3mm (1/4in) Stereo Male to RCA Female Adapter image
 
(based on 3 ratings)
Read All Reviews
Brand: Cables To Go
Located in: Adapters
Make the right connection with our Adapters. This adapter is ideal for adapting a male RCA plug to 6.3mm (1/4in) stereo jack.
  • Connectors: RCA Female to 6.3mm (1/4in) Stereo Male
  • Adapts a RCA plug to 6.3mm (1/4in) stereo plug
More information for the 6.3mm (1/4in) Stereo Male to RCA Female Adapter
Review Snapshot®
Avg. Customer Rating:
 
3.3 stars
(based on 3 reviews)
67% of respondents would recommend this to a friend.

Customers most agreed on the following attributes:

Primary use:
Business(3)
 
Great Adapter for Quick Changes
By Sound GalVerified Purchaser from Butte, MT on 7/7/2010
Pros:
Durable construction, Highly Compatible, Strong Connection Points
Best Uses:
Audio Systems
Describe Yourself:
Quality Oriented
Primary use:
Business
Bottom Line:
Yes, I would recommend this to a friend

Comments about Cables To Go 6.3mm (1/4in) Stereo Male to RCA Female Adapter:

Great for quick changes to a different microphone

 
Cable adapter saves the show
By RipperVerified Purchaser from Costa Mesa, AC on 10/24/2009
Pros:
Consistent Performance, Durable, Easy To Configure, Easy To Use
Best Uses:
Portable Devices
Describe Yourself:
Power User
Primary use:
Business
Bottom Line:
Yes, I would recommend this to a friend

Comments about Cables To Go 6.3mm (1/4in) Stereo Male to RCA Female Adapter:

This very durable all metal adapter gave me the right connection for remote broadcast audio. The quality construction and materials will last for years.

[4 of 5 customers found this review helpful]

 
I'm not sure what these are good for
By Radio guyVerified Purchaser from Lincoln, NE on 9/24/2009
Cons:
Poor Design
Describe Yourself:
Power User
Primary use:
Business
Bottom Line:
No, I would not recommend this to a friend

Comments about Cables To Go 6.3mm (1/4in) Stereo Male to RCA Female Adapter:

The way there are wired seem to preclude their being useful for anything.

We use a lot of RCA to 1/4" adapters to connect consumer and semi-pro gear to our studio consoles. Normally things work quite well. This time we plugged in a laptop's headphone out to a 1/8" TRS to twin RCA cable, put these adapters on the end, and plugged in to the back of a Yamaha 02R. No signal. Pulled it out a click. No signal. Replaced them with RCA to 1/4" mono adapters and all was well. We tested these adapters and found the positive of the RCA goes to both the tip and the sleeve of the 1/4"; that means they do exactly nothing when hooked to a balanced input.

I'm trying to figure out what these could be used for, and can't come up with anything. Next time we will make sure we get RCA to mono 1/4"!

Cables To Go Response: We emailed Radio Guy back with this question: "We have a few of these pulled from stock so we could test the pinout on them and all of the them tested that the tip and ring went to the positive on the RCA end and the sleeve went to the negative. For your application, were you going from a 3.5mm on a laptop out to dual RCA cable and then putting these adapters on the end of the RCA plugs?" He responded: "Yes, that's exactly the setup we used. When plugged into the line inputs on the Yamaha 02R, the positive signal went to both the positive and negative on the 02R's 1/4" input jacks. This didn't hurt anything, except perhaps my pride in being able to hook things up. We swtiched out the 40640 adapters with some RCA to 1/4" tip-sleeve adapters and everything worked." In other words, he was using this adapter for the wrong application.
Customer Reviews about the 6.3mm (1/4in) Stereo Male to RCA Female Adapter at Cables To Go
Powered by PowerReviews
Copyright © 2011 Cables To Go All Rights Reserved. Do not republish contents.