Buy the Power Over Ethernet (POE) Power Adapter on http://www.cablestogo.com Print This PagePrint This Page
Power Over Ethernet (POE) Power Adapter image
 
(based on 3 ratings)
Read All Reviews
Brand: Cables To Go
Located in: Adapters
Installing network devices in distant locations of a building can be a challenge since high voltage outlets may not be available. The implementation of Power over Ethernet (PoE) provides a convenient solution for supplying both data and power over a single cable and connection to supported devices. The challenge exists when older network switches which do not support PoE are used with new PoE-compliant devices.

The Power over Ethernet adapter by Cables To Go is the solution for network switches that lack PoE functionality by injecting power into the existing network cabling to a PoE-compliant device. Data and power can now be delivered to devices such as cameras, printers, wi-fi access points or VoIP phones through a single cable and connection without having to replace network hardware.

Please Note: The Power over Ethernet adapter by Cables To Go is intended for PoE-compliant devices which can accept both data and power through a single RJ45 connection over Cat5/6 cable. Please consult with your device’s owner’s manual to ensure compatibility.
More information for the Power Over Ethernet (POE) Power Adapter
Review Snapshot®
Avg. Customer Rating:
 
2.3 stars
(based on 3 reviews)
 
Where is the Other Half II
By MikeVerified Reviewer from Columbus, Ohio on 9/16/2010
Pros:
Easy To Use
Cons:
Bad Installation Guide
Describe Yourself:
Power User
Primary use:
Business

Comments about Cables To Go Power Over Ethernet (POE) Power Adapter:

After reading previous comment the problem is with the supplied installation guide. The installation schematic and verbage clearly show another piece (power splitter)for the device end. Although this is not required for POE devices and therfore not needed it should NOT be illistrated as a novice might assume they are missing something. Common China speak for electronics!

 
poe is poor design
By BlackjackVerified Reviewer from FL on 6/30/2010
Cons:
Lacks all parts, Poor Design
Describe Yourself:
Casual User
Primary use:
Personal
Bottom Line:
No, I would not recommend this to a friend

Comments about Cables To Go Power Over Ethernet (POE) Power Adapter:

Poor design can't regulate voltage without buying additional parts.

[1 of 1 customers found this review helpful]

 
Where is the other half?
By computer joeVerified Reviewer from michigan on 6/23/2010
Pros:
Durable, Easy To Configure, Easy To Use, Reliable Performance
Describe Yourself:
Power User
Primary use:
Business
Bottom Line:
Yes, I would recommend this to a friend

Comments about Cables To Go Power Over Ethernet (POE) Power Adapter:

I use POE all the time, this looks like a great injector. But it does not say it is 802.3poe
compliate, so you need the other half, on the other end of the cable by the piece of equipment you are trying to power, to split the power back off the data lines. with out other half this product is over priced.

Cables To Go Response: Thank you for your recent review of our product 29816 Power Over Ethernet Power adapter. This adapter does support the 802.3ak specification. Our solution is intended for “Phantom powering”, to supply power through the RJ45 UTP connection. The best example I can give is like an internal phone system which supplies the phone with power and voice data over a single Cat5e cable.
Unfortunately, we currently do not have the other piece that would take the PoE signal and break out the Ethernet and DC power plug separately.

Thanks,
Support Supervisor

Cables To Go
3555 Kettering Blvd.
Moraine, Ohio 45439

P | 800.826.7904
Customer Reviews about the Power Over Ethernet (POE) Power Adapter at Cables To Go
Powered by PowerReviews
Copyright © 2011 Cables To Go All Rights Reserved. Do not republish contents.